Re: Hydrothermal Convection Properties!
Okay here are the parts ordered, shipped, and awaiting delivery:
Danger Den Laing D5 pump ½" shipped 2/2 arrived 2/3 delivered 7th my B-D
Danger Den Maze4 Acetal Top ½" same as above Fedex
Swiftech Apogee Extreme CPU ½" shipped second USPS from Oklahoma???
Parts in hand:
1. 11ft of ½"ID 3/4OD Nylon braid tubing 200psi@75°/100psi@150°
....w/½"ID coil bend ratio
2. Misc. plumbing parts both PVC/Nylon/brass/Neoprene .....fittings/barbs/o-rings/washers
3. 10 stainlees wormdrive clamps
4. '67 GTO 6.5 litre 428cid dual heater core w/o AC Delco OEM NOS circa '71
5. Four 38mmx120mm Panaflo 115cfm fans
6. Two 12"x36" 2mm aluminum flatstock sheets - to be vertically finned ......outside and the other for fabrication of 3" rise dual core fan shroud
7. One ¼" core grade copper flatstock to be silver soldered inside aluminum ......circumfrence
8. Nitrofurazone anti bacterial/fungus treats 300 gallon/1100 litre
9. Five thermal temp sensors
Parts yet accuired:
Suitable temporary reservoir while concentrc cop/alum/fin is constructed
may use 2lb. Folgers polyvinyl cannister?
Mop/shop vac! couldn't resist that one!
And ALL fan/system components will rotate position till maximum stable peak is reached and radiator will ride top shelf 5200btu vertical draft AC on lower fan shroud bracket with neoprene side skirts..........had to get the Highland wear into this mix MacNachtan clan plaid opptional Sgian Dubh, Dirk and sporan mandatory!
Pcitures forth coming, yeah yeah, forgot the Nicads WTF = World Turned Fecal
__________________
Happiness isn't something you experience; it's something you recall.
Last edited by dryadsoul; 02-05-2006 at 06:51 AM.
|