[Lsdmeasap]

OK, well I just want to let you know what you think is "Default" the value shown on the Left and what you thought you got with AUTO is not what you get. it is what is loaded in the BIOS only at that time, and often changes within the BIOS itself and within windows.


No, lower the number the better on most all settings except Rank Write to Read Delay, that one differs from setting to setting depending on the chipset, ram and other settings. but the rest, the lowest you can get stable is best


I am not sure about SiSandra, as I dont use it as much these days, but this is what my 2x1 800Mhz Mushkins at 900 Mhz 4-5-5-12 get in SiSandra>>>
Int Buff'd iSSE2 Memory Bandwidth : 9.84MB/s/MHz
Float Buff'd iSSE2 Memory Bandwidth : 9.96MB/s/MHz

Can you compare cache and memory benchmark in everest? Tools, then cache and benchmark. I would just think you do not have the correct best timings as of now is why they are so low. Act to Act And tRead likely are why, can you not use 3 on Act to act, and 7 on tRead?

Set act to act to 3, tRead to 7 and raise the rest all back up for now, then lower them (All the that you just raised slowly again) leave act to act and tRead set to 3 and 7