[pancakey]

I just got a new system


e7200
GA-EP45-DS3R
2gb of Crucial Ballistix BL12864aa1065 (1066 555-12 2.2v)



Right now I have the system running at 333 FSB with 9.5 multi for 3.16 on the CPU and i am running the system memory multipler at 2.4b for 800mhz


With these settings the system is rock solid and pretty cool (53 at max load in Prime 95) with everything on auto in the bios.


When I try to push the system to 400 fsb that’s when everything starts to get sticky


Prime95 will run sometimes with errors and sometimes without. I have run memtest on my ram with no errors. I have tried undeclocking the cpu with x6 muti and I still have errors in prime95 SOMETIMES.


I'd love to get a stable 400 FSB so I could push my CPU a little bit more. I’d also love to run the ram @ the 1066 but even with the timings set and Voltage set to 2.2 (it’s purple in the bios yikes!) I’m still having the same problems.


I've also been reading a lot about the overall screwy-ness of the bios on this board and all the p45 advanced options.


any ideas?

thanks in advance!!