Quote:
Originally Posted by Lsdmeasap
Sorry about that, I thought since you were using Auto you did not want to tinker with it all. Here would be optimal ranges for your settings you gave I will assume this is a E8400 CPU right? >>>
MB Intelligent Tweaker(M.I.T.)
|
I need help for my memory only(optimal ranges).My specs are:
E7300
GA-EP43-DS3L
8800gt/gs
OCZ Fatal1ty PS2-6400 2x2Gb (5-4-4-18) 2.1v
I'm using auto with values:
MB Intelligent Tweaker(M.I.T.)
DRAM Performance Control
Performance Enhance...................: [Turbo]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: [Auto] *
Memory Frequency (Mhz) ..............: 800
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................:6 *
tRCD .........................................: 6 *
tRP'............................................: 6 *
tRAS..........................................: 18 *
Advanced Timing Control [Press Enter]
tRRD...........................................: 3
tWTR..........................................: 3
tWR............................................: 6
tRFC...........................................: 48 *
tRTP...........................................: 3
Command Rate (CMD) ....................:0 *
Channel A
Static tRead Value.........................:5
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:5
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
MCH/ICH
MCH Core
.....1.100V...........: <<
DRAM
DRAM Voltage
....1.800V............:
DRAM Termination .
0.900V............:
Channel A Reference 0.900V............:
Channel B Reference 0.900V............:
THX