View Single Post
  #22 (permalink)  
Old 02-17-2009, 06:42 AM
Classicman Classicman is offline
Junior Member
 
Join Date: Feb 2009
Posts: 23
Default Re: overclocking x48t-dq6 q9550

Robust Graphics Booster___________ [Turbo]
CPU Clock Ratio ____________ [8]
Fine Clock Ratio ____________[0.5]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [412]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
Performance Enhance________________[Standart]
System Memory Multiplier____(SPD)__[4.00D]
Memory Frequency (Mhz)_____________1648
DRAM Timing Selectable_______ SPD __ [Manual]

CAS Latency Time________________ 8
Dram RAS# to CAS# Delay_________ 8
Dram RAS# Precharge Delay_______8
Precharge Delay (tRAS)__________ 24

ACT to ACT Delay (tRRD)_________ 4
Rank Write to READ Delay________ 8
Write to Precharge Delay_________ 12
Refresh to ACT Delay______________ 60
Read to Precharge Delay__________ 6
Static tRead Value_______________8
Static tRead Phase Adjust________ [Auto]
Command Rate(CMD)_________________[2T]

CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [normal]
GMCH Clock Skew Control [Normal]

System Voltage Control____ [Manual]
DDR3 OverVoltage Control__ [+0.45V]
PCI-E OverVoltage Control_ [+0.10V]
FSB OverVoltage Control___ [+0.35V]
(G)MCH OverVoltage Control [Normal]
Loadline Calibration_______[Enable]
CPU Voltage Control_______ [1.350]

Last edited by Classicman; 02-18-2009 at 09:13 AM.
Reply With Quote