[Lsdmeasap]

@ MaxFX
If you are stable in OCCT/Orthos/Prime/Memtest or Intel Burn test then you have no need to change this setting.

This is only need for stability or in trying super high clock speeds, otherwise you do not need to adjust if you are stable in Auto

Games flickering or flashing is likely your GFX Card is overheating or your PSU is not giving it enough power possibly

@ Dodgexander

The Auto setting on this is not always "Correct" it is only a constant Value of 63% (.76) of your set Vtt voltage. So what is "Correct" all depends on what you are running, and what Vtt you are using.

For example if you are using to much or to little Vtt and want to keep it that way (For some reason) then you may need to adjust this so you get the correct amount. Or if you are using the incorrect Vtt and do not know it, adjusting this can get you stable as well.

And as said above, this will also when set properly allow you to clock higher then normally possible and can allow you to also lower voltages across the board (Vcore/Vtt/MCH)