[Clapaucio]

Well, these sticks of mine comes with an electric blue heatsink very similar to the ones on your post, except for the clip between heatsinks. I know they are "value" RAM but the problem is they fail at the same rate at stock and overclocked (i've tried until 965 mhz).

On Sunday, I fixed my old computer (AMD athlon xp2500,very old..., psu died) and I was able to dowload memtest86+ 2.1 and others, and tried with different combinations, and evry one of them failed. Only recently I've noticed the fail is often on test 7, address 922MB to 1080 approx. up to 229 errors in 2 rounds ), so this is i Was wondering if one of the sticks is faulty.

But, just in case, here are my specs right now:

MB Intelligent Tweaker(M.I.T.)o
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 9x
Fine CPU Clock Ratio.....................:.0.0
CPU Frequency ...........................: 3.00 Ghz. (333x9)


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: disabled
CPU Host Frequency (Mhz) ............:333 Mhz
PCI Express Frequency (Mhz) .........100

C.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 700
PCI Express Clock Drive.................: <<< 700
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<


DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: 2.40b
Memory Frequency (Mhz) ..............: 800 mhz
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................4
tRCD .........................................4
tRP'...........................................4
tRAS..........................................12

Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

Advanced Timing Control
tRRD...........................................3
tWTR..........................................3
tWR............................................6
tRFC...........................................52
tRTP...........................................3
Command Rate (CMD) ....................:0

Driving Strength Profiles
Driving Strength ............................

Channel A
Static tRead Value.........................:6
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Channel B
Static tRead Value.........................:6
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:Auto
CPU Termination…..... 1.200V*.......: Auto

CPU PLL…………………....1.500V*.......: Auto
CPU Referen.…………....0.755V*.......: Auto

CPU Reference2………,,0.800V*.......:Auto
MCH/ICH
MCH Core…………….....1.100V...........: 1.200
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.500V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave

DRAM
DRAM Voltage ……....1.800V............: 2.060
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

Integrated Peripherals
Legacy USB Storage Detect ..............[Enabled]


I will try in a few minutes to upload some pictures i've made with the results of the last memtest

Thanks for your help

I appreciate it a lot.