Thread: GA-EP45-UD3P - Won't boot with 450FSB
View Single Post
  #5 (permalink)  
Old 05-04-2009, 01:15 PM
profJim's Avatar
profJim profJim is online now
Chief Munchkin
  
Join Date: Dec 2008
Location: Tacoma, WA. [USA]
Posts: 1,426
Default Re: GA-EP45-UD3P - Won't boot with 450FSB
His upgrade includes 4x1GB Ballistix Tracer 2.0 volt DDR2-800 ram, the same ones Lsdme recently reviewed.

His current bios settings are based on Lsdme's suggestions, probably for 8 x 401MHz.

In his previous thread, he was struggling to o/c to 3.20GHz using value ram. The o/c portion starts with post #12.
__________________
_/\ /\ /\ /\ guru in training (for life) /\ /\ /\ /\_ _______ ~~ we get too soon old and too late smart ~~
E6550 @ 3.444GHz [7x492MHz] ___________________ GeminII down-draft HS w/dual Scythe S-Flex fans
EP45-UD3P [rev: 1.0] ~ Bios: F6 __________________ CoolerMaster CM 690 case (RC-690-KKN1-GP)
2x2GB Mushkin XP2-8500 [996599] @5-5-4-12 [1:1] __ Zalman ZM-MFC2 controller, watt meter & temp probes
Evga 7600GT video card _________________________ Asus VH242H monitor [1920x1080]
Antec EarthWatts PSU (500w) _____________________Logitech Z5500 Digital 5.1 Speakers
WD Caviar Black WD6401AALS 640GB ___________.___ win 2000 pro (sp4)
<><><> compromise and do it my way <><>++ I'm not always right, but I'm never wrong ++
.
Loading OPTIMIZED bios defaults is REQUIRED before you tweak your bios settings.
This includes new system setups and immediately after flashing your bios!!!
Reply With Quote