View Single Post
  #9 (permalink)  
Old 05-04-2009, 05:37 PM
profJim's Avatar
profJim profJim is online now
Chief Munchkin
 
Join Date: Dec 2008
Location: Tacoma, WA. [USA]
Posts: 1,426
Default Re: GA-EP45-UD3P - Won't boot with 450FSB

Dan,
We need to know what your o/c goal is.

Right now your memory timings are too tight and need to be set to 5-5-5-15.
Leave tRD = 9. 10 would be OK (it's no big deal right now).
Set the following to AUTO:
tRRD
tWTR
tWR
tRTP

Boot your system and do your stress testing.
Any problems? Detail them, how long did they run? error messages? boot issues?
Include screen shots whenever possible. It's best to post the updated bios unless there's only 1 or 2 suggested changes.
"I did what you told me to do" doesn't cut it, it will waste everyone's time.

Anal can be good, but then again ..... oh, never mind.
__________________
_/\ /\ /\ /\ guru in training (for life) /\ /\ /\ /\_ _______ ~~ we get too soon old and too late smart ~~
E6550 @ 3.444GHz [7x492MHz] ___________________ GeminII down-draft HS w/dual Scythe S-Flex fans
EP45-UD3P [rev: 1.0] ~ Bios: F6 __________________ CoolerMaster CM 690 case (RC-690-KKN1-GP)
2x2GB Mushkin XP2-8500 [996599] @5-5-4-12 [1:1] __ Zalman ZM-MFC2 controller, watt meter & temp probes
Evga 7600GT video card _________________________ Asus VH242H monitor [1920x1080]
Antec EarthWatts PSU (500w) _____________________Logitech Z5500 Digital 5.1 Speakers
WD Caviar Black WD6401AALS 640GB ___________.___ win 2000 pro (sp4)
<><><> compromise and do it my way <><>
++ I'm not always right, but I'm never wrong ++
.
Loading OPTIMIZED bios defaults is REQUIRED before you tweak your bios settings.
This includes new system setups and immediately after flashing your bios!!!
Reply With Quote