Re: GA-EP45-UD3P - Won't boot with 450FSB
Ignore my post above. I've had the same message on rare occasions.
Use your current settings but LOWER MCH core to 1.20. if that fails, lower it to 1.15 and try again.
Please detail the stability testing you've done so far with your new gear.
cpu/mem speeds: Programs? Elapsed time? etc.
FWIW, most E8400 setups I've seen here stop at 3.9+GHz.
__________________
_/\ /\ /\ /\ guru in training (for life) /\ /\ /\ /\_ _______ ~~ we get too soon old and too late smart ~~ E6550 @ 3.444GHz [7x492MHz] ___________________ GeminII down-draft HS w/dual Scythe S-Flex fans
EP45-UD3P [rev: 1.0] ~ Bios: F6 __________________ CoolerMaster CM 690 case (RC-690-KKN1-GP)
2x2GB Mushkin XP2-8500 [996599] @5-5-4-12 [1:1] __ Zalman ZM-MFC2 controller, watt meter & temp probes
Evga 7600GT video card _________________________ Asus VH242H monitor [1920x1080]
Antec EarthWatts PSU (500w) _____________________Logitech Z5500 Digital 5.1 Speakers
WD Caviar Black WD6401AALS 640GB ___________.___ win 2000 pro (sp4)
<><><> compromise and do it my way <><>  ++ I'm not always right, but I'm never wrong ++
.
Loading OPTIMIZED bios defaults is REQUIRED before you tweak your bios settings.
This includes new system setups and immediately after flashing your bios!!!
|