Re: GA-EP45T-DS3R DDR3-1600 So far so good
For specific troubleshooting and testing with OCCT:
1) Select CPU:OCCT on the main screen.
2) Click on the "Test Type" field and select "Custom".
3) Click on the "Test Mode" field and select:
--> Small Data Set for "small FFT" cpu testing
--> Medium Data Set for "Blend" testing of cpu and ram
--> Large Data Set for "large FFT" ram testing
4) Set the Custom Test Duration time.
There are similar Custom settings using the CPU:Linpack test option where:
--> Low (25% free mem) uses the most memory
--> Medium (50% free mem) uses less memory
--> High (90% free mem) uses the least memory
Watch your cpu vcore temperatures when testing with the Linpack option.
20 - 30 minutes of Linpack testing should be sufficient for each Linpack option.
Post your bios settings with your test results, additional screen-shots help to eliminate possible errors and/or confusion.
__________________
_/\ /\ /\ /\ guru in training (for life) /\ /\ /\ /\_ _______ ~~ we get too soon old and too late smart ~~ E6550 @ 3.444GHz [7x492MHz] ___________________ GeminII down-draft HS w/dual Scythe S-Flex fans
EP45-UD3P [rev: 1.0] ~ Bios: F6 __________________ CoolerMaster CM 690 case (RC-690-KKN1-GP)
2x2GB Mushkin XP2-8500 [996599] @5-5-4-12 [1:1] __ Zalman ZM-MFC2 controller, watt meter & temp probes
Evga 7600GT video card _________________________ Asus VH242H monitor [1920x1080]
Antec EarthWatts PSU (500w) _____________________Logitech Z5500 Digital 5.1 Speakers
WD Caviar Black WD6401AALS 640GB ___________.___ win 2000 pro (sp4)
<><><> compromise and do it my way <><>  ++ I'm not always right, but I'm never wrong ++
.
Loading OPTIMIZED bios defaults is REQUIRED before you tweak your bios settings.
This includes new system setups and immediately after flashing your bios!!!
|