Cpu=http://www.newegg.com/Product/Product.aspx?Item=N82E16819115037 Stock cooling
Motherboard=Gigabyte GA-EP45-UD3P Ultra durable 3
Bios version=F7
RAM= Corsair 2x2GB
TWIN2X4096-8500C7
But what does that sound mean? It must mean something or it shouldn't make that sound. Nevertheless, my equipment is totally new. Could something be defected? or could it just be the OS? Because when I'm trying to launch it with safe mode it freezes at a .sys file and then restarts.
__________________________________________________ ______________________
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 8 X
Fine CPU Clock Ratio.....................:+0.5
CPU Frequency ...........................: 2,83 GHZ (333*8,5)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [disabled]
CPU Host Frequency (Mhz) ............: 266 Mhz
PCI Express Frequency (Mhz) .........:auto
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<< 0
MCH Clock Skew (ps)...................: <<< 0
DRAM Performance Control
Performance Enhance...................: [turbo]
Extreme Memory Profile (X.M.P.).....: Disabled (Do not exist in my bios)
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: Auto
Memory Frequency (Mhz) ..............: 800 Mhz
DRAM Timing Selectable ................: [Auto]
Standard Timing Control
CAS Latency Time........................ 5 [auto]
tRCD ......................................... 5 [auto]
tRP'........................................... 5 [auto]
tRAS.......................................... 18 [auto]
Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
Advanced Timing Control
tRRD........................................... 3 [auto]
tWTR.......................................... 3 [auto]
tWR............................................ 6 [auto]
tRFC........................................... 52 [auto]
tRTP........................................... 3 [auto]
Command Rate (CMD) .................... 0 [auto]
Driving Strength Profiles
Driving Strength ............................ auto.
Channel A
Static tRead Value.........................: 7 Auto
tRD Phase0 Adjustment...................:Auto <<< 0
tRD Phase1 Adjustment...................:Auto 0
tRD Phase2 Adjustment .................:Auto 0
tRD Phase3 Adjustment..................:Auto 0
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage Control
CPU
CPU Vcore….……….........................:Auto 1,3000v
CPU Termination…..... 1.200V*.......: 1,200v auto
CPU PLL…………………....1.500V*.......: Auto
CPU Referen.…………....0.760V.......: auto
CPU Reference2………,,0.800V*.......: cannot find.
MCH/ICH
MCH Core…………….....1.100V...........: Auto
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.500V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave
DRAM
DRAM Voltage ……....1.800V............: auto
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [enabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [enabled]
Virtualization Technology................: [enabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[enabled] *Note* Must be enabled to flash from USB