[edge929]

Thanks for the tip Psycho. You'll be happy to know your idea indeed worked. As I type this, Orthos is running (has been for 15 mins now) at 533x7 with MCH Core at 1.34V, VDimm at 2.10 and MCH Reference at 0.830 and MCH/DRAM Reference at 1.20.

I wasn't happy about running 1.56 by any means but everytime I lowered it and changed nothing else I was the mayor of BSOD city. I didn't occur to me to raise the Ref voltage as I'm honestly not overly familiar with Ref voltages and how they pertain to the mainstream voltages such as Vcore, MCH Core and VDimm.

Will let Orthos run for another 1-2 hours and then I will try to get 533x8 completely stable, tighten my RAM timings and call it good.