Fatal1ty Z77 Pro ( Boot Fail with 0x36 BUGLED ) Help !!!!

[BenchAndGames]

I have a problem with the ASRock Fatal1ty Z77 Professional.


When I turn on the PC, no signal to the monitor, it is 10-15 seconds, automatically turns OFF and turn ON again automatically.
Not always happens, it does so at random time.

But after turning on, it works fine, I have no problems.


I have to say that there are times when I have this problem, you can turn ON without signal on the monitor, and turn ON automatically, 3 or 4 times in a row.

Only this happens, the BUGLED shows me the code 36.

In the manual say:
0x36: CPU Post Memory inicialization. System Management Mode ( SMM ) initialization.

I have a 1.30 Bios version

My System:



► CPU: i7 2600k #4.6 GHz
► GPU: MSI GTX 680 Twin Frozr III OC Edition
► RAM: 16GB G.Skill Sniper #2133 MHz
► MB: AsRock Fatal1ty Z77 Professional
► SSD1: Corsair Force 3 60GB
► SSD2: G.Skill Phoenix Pro 60GB
► HDD: WD Caviar Blue 820GB
► PSU: Corsair HX850W

[Matteo Magri]

Hi,

same problem with the ASRock 990FX Extreme4 with last bios installed.

Did you have solve it ?

Thanks

[zslawek]

I had the same problem with my Fatal1ty Z68 board for all 2.xx bios. I had to RMA the board to the dealer and got back Fatal1ty Z77.