Z77 PRO3 - where do I update my drivers / other problems

[Rusted]

Some of the features on the MOBO aren't working. Three crashes at launch; persistence.exe, some other program and VirtuMVP.exe
I also get frequent bluescreens, I did reseat my RAM.
I only used the disc provided for the MOBO but I don't know where to update it from there. My GPU is updated
Many other programs often crash, like steam, guild wars 2, skype. My last MOBO didn't have this problem although that's like saying an entirely different system works better

[wazza300]

you need to look on asrocks website,then type in your mb make/model and it will list the latest bios,drivers,utilities ect

[Rusted]

you need to look on asrocks website,then type in your mb make/model and it will list the latest bios,drivers,utilities ect

Thanks, I'll make sure I do that. Could this be the reason why a lot of my programs crash?

[wazza300]

could be,if your memory supports x.m.p in the bios try enabling that and set to profile 1

[profJim]

If you are getting windows BSODs, you can run WhoCrashed (freeware) and post the report information.

This is an example of an abbreviated WhoCrashed report:

 System Information (local)
--------------------------------------------------------------------------------
 
computer name: P35-DS3L
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:Windows
CPU: GenuineIntel Pentium(R) Dual-Core CPU E6300 @ 2.80GHz Intel586, level: 6
2 logical processors, active mask: 3
RAM: 8588345344 total
VM: 2147352576, free: 1935466496
 
 
 
--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------
 
Crash dump directory: C:WindowsMinidump
 
Crash dumps are enabled on your computer.
 
 
On Sat 11/24/2012 1:55:04 AM GMT your computer crashed
crash dump file: C:WindowsMinidump112312-13228-01.dmp
This was probably caused by the following module: fltmgr.sys (fltmgr+0x5039) 
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88000C45039, 0xFFFFF880084D47E0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:Windowssystem32driversfltmgr.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Microsoft Filesystem Filter Manager
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code. 
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. 
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. 
  

[Rusted]

If you are getting windows BSODs, you can run WhoCrashed (freeware) and post the report information.

This is an example of an abbreviated WhoCrashed report:

 System Information (local)
--------------------------------------------------------------------------------

computer name: P35-DS3L
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:Windows
CPU: GenuineIntel Pentium(R) Dual-Core CPU E6300 @ 2.80GHz Intel586, level: 6
2 logical processors, active mask: 3
RAM: 8588345344 total
VM: 2147352576, free: 1935466496



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:WindowsMinidump

Crash dumps are enabled on your computer.


On Sat 11/24/2012 1:55:04 AM GMT your computer crashed
crash dump file: C:WindowsMinidump112312-13228-01.dmp
This was probably caused by the following module: fltmgr.sys (fltmgr+0x5039) 
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88000C45039, 0xFFFFF880084D47E0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:Windowssystem32driversfltmgr.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Microsoft Filesystem Filter Manager
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code. 
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. 
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. 
  

I'll give that a try later, and the diagnostic shows that no problems were detected.

I have a friend that had the same problem, and what he did is turn the frequency of the RAM down, however I don't think I can turn 1333 down. I'm going to buy better RAM and if that doesn't solve it, I will post in this thread again. Thanks for the help guys

[wazza300]

Memory should run fine provided you set the right voltage for it,what dram voltage are you using? If its 1600mhz set it to that and set 1.55v dram voltage

[Rusted]

1333mhz version.