Asrock G41C-S

[tauri01]

Hi

I have Asrock G41C-S model mainboard. is this mainboard support Wake On Lan setting ? I cant see this setting in BIOS menü. if yes how can i set this function ? Thank you

[ASRock TSD - Emily]

Hi tauri01,

Please set "PCI Devices Power On" to [Enabled] to try.
(Path: BIOS -> Advanced -> ACPI Configuration -> PCI Devices Power On)

Thanks!

Have a nice day
ASRock TSD
Emily

[tauri01]

Hi tauri01,

Please set "PCI Devices Power On" to [Enabled] to try.
(Path: BIOS -> Advanced -> ACPI Configuration -> PCI Devices Power On)

Thanks!

Have a nice day
ASRock TSD
Emily

I did but still not working.I have read G41C-S manual. May i this setting ?


"EUP_LAN and EUP_AUDIO jumper design decreases the power consumption
of this motherboard to meet EuP standard. With an ASRock EuP ready
motherboard and a power supply that the 5VSB power efficiency is higher
than 50% under 100mA current consumption, your system is able to submit
EuP standard. The default setting (short pin1 and pin2) is EuP enabled. If you
want to disable this power saving function, you may short pin2 and pin3.
Please be noticed that when EUP_LAN jumper is set to enabled, the
Wake-On-LAN function under S3 (Suspend to RAM), S4 (Suspend to Disk),
and S5 (Soft Off) will be disabled."

[- wardog -]

Please be noticed that when EUP_LAN jumper is set to enabled, the
Wake-On-LAN function under S3 (Suspend to RAM), S4 (Suspend to Disk),
and S5 (Soft Off) will be disabled."

That would seem the most logical explanation to try for testing the WoL feature.

Good find. No disrespect to anyone but that sure beats the canned response posted earlier.

[tauri01]

I did all combination but still not working.

[tauri01]

I did but still not working.I have read G41C-S manual. May i this setting ?


"EUP_LAN and EUP_AUDIO jumper design decreases the power consumption
of this motherboard to meet EuP standard. With an ASRock EuP ready
motherboard and a power supply that the 5VSB power efficiency is higher
than 50% under 100mA current consumption, your system is able to submit
EuP standard. The default setting (short pin1 and pin2) is EuP enabled. If you
want to disable this power saving function, you may short pin2 and pin3.
Please be noticed that when EUP_LAN jumper is set to enabled, the
Wake-On-LAN function under S3 (Suspend to RAM), S4 (Suspend to Disk),
and S5 (Soft Off) will be disabled."

How can i slove this problem ?