So frikkin' true man..! Nasty icons on my desktop can make me all shaky & nervous.. :eek:Originally Posted by FLaCo
![]()
I confess.....I put all those there for the pic...:o
They're gone now....:cool:![]()
<img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
Revenge is just a respawn away....Pagosa LAN Parties
So frikkin' true man..! Nasty icons on my desktop can make me all shaky & nervous.. :eek:Originally Posted by FLaCo
![]()
Dude, your "advice" is correct....your tone however, sucks. Oh, and yeah, I know.Originally Posted by Soulburner
<img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
Revenge is just a respawn away....Pagosa LAN Parties
PCmark2k2 always reads my processor and AGP bus wrong
AGP 2x? yea right!
rig changes too much
dual boot: WinXP SP1, Mandrake 9.2
here is my setup, just wondering if thats ok and also why my harddrive is so low.
MB i875P 5P1A4D IC7 ABIT ATX
CPU P4 2.4CGHz 800M 478P/512K HT RT
DDR 2x256 MB TWINX 512-3200LLPT COR RT
KB LOGITECH|OPTICAL DESKTOP BLK
FD 1.44MB MITSUMI
CPU FAN INTEL P4 SPARK7+ A1715 RT
CDRW LITEON 52X32X52X LTR-52327S BK
ETHRNT LINKSYS|LNE100TX 10/100 v5.1
MAXTOR 160gb 8MB Cache
VOODOO 5 64mb --please dont hurt me for using this i ran out of money
Did you check you HHD's settings? Make sure its running at a full ATA133. Mine does, look at my HDD score :shrug: . Good luck, : peace2: Mista K6
Modified Dell 8200 Case:
-400MHz FSB i850 Intel mobo
-P4 Williamette Socket 478, 1.9GHz
-768MB 16-bit PC800 RDRAM
-MSI GF4 Ti4200 128MB @ 284/581
-7200 RPM Maxtors: 60GB (2MB) on mobo and 160GB (8MB) on ATA/133 PCI Card
-Creative Inspire T7700 7.1 Speaker System on an Audigy 2
-Windows XP Home Edition SP2
Rock on : peace2: , MiStA K6
how can check to see what my harddrive is running at and how can i change it?
ThermalTake Blue side window case
7x 80mm fans 2050 rpm
MB i875P 5P1A4D IC7 ABIT ATX
CPU P4 2.4CGHz 800M 478P/512K HT RT
DDR 2x256 MB TWINX 512-3200LLPT COR RT
KB LOGITECH|OPTICAL DESKTOP BLK
FD 1.44MB MITSUMI
CPU FAN INTEL P4 SPARK7+ A1715 RT
CDRW LITEON 52X32X52X LTR-52327S BK
ETHRNT LINKSYS|LNE100TX 10/100 v5.1
MAXTOR 160gb 8MB Cache
FX 5600 Ultra
19in CRT View Sonic w/ ultra bright
drenader has attached this image:
Go into Device Manager, and look for:
IDE ATA/ATAPI Controllers
----> Primary IDE Channel
----> Secondary IDE Channel
In the properties for those it tells you the current mode its running in. It should be set to "DMA If Available". Should also say DMA Mode 5 in the box.
For CD-ROM drives it uses DMA Mode 2.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks