Agreed. I would say 12 hours of Prime then try a few hours of Linpack testing to really push it to the limit.
Hmm, I never have done it much while under load, probably because I normally only grab a validation at super high clock attempts so I am not priming.
No, 2 hours of prime is not enough really. I have seen it fail at 4, 12, and 16. After 16 I think I have never seen it fail, so I always assume if it makes it to 16 it is stable and will run for 24+ hours as I have let it run 48+ several times on setups that failed at 12-16 until I stabilized them.
But ya 2 hours is for sure not enough
~ X58 BCLK WORLD RECORD ~
~ <Mushkin Enhanced Alpha Team ~
* BIOS Templates (Give Us Your Settings Please) *
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline ~ 996587 HP
Crucial Reviews - C300 SSD ~ Blue Tracer DDR3 ~ Ballistix DDR2
X58 BIOS LED Debug Codes
Agreed. I would say 12 hours of Prime then try a few hours of Linpack testing to really push it to the limit.
GIgabyte GA-990FXA-UD3
AMD FX8120 @ 4GHz
Patriot 1866MHz EL series 2X4GB DDR3
Powercolour HD 6970 2GB w/XFX 8800GT 512MB Hybrid PhysX
Creative X-FI titanium HD w/Technics class A 300W amp and tower speakers
PC P&C 500W PSU
2TB Seagate
Coolermaster 690II w/Corsair H100 tucked under the hood
PS: Just tried the validation system on my PC and both automatic and manaul uploading using caused rejected submissions just like the op's.
GIgabyte GA-990FXA-UD3
AMD FX8120 @ 4GHz
Patriot 1866MHz EL series 2X4GB DDR3
Powercolour HD 6970 2GB w/XFX 8800GT 512MB Hybrid PhysX
Creative X-FI titanium HD w/Technics class A 300W amp and tower speakers
PC P&C 500W PSU
2TB Seagate
Coolermaster 690II w/Corsair H100 tucked under the hood
I switched back to stock config (333x9) and optimum settings and it still says rejected, hahah.
Originally Posted by Alex St. John
Best Quote Ever...Originally Posted by Psycho101
Intel E8400 EO@445x9--Gigabyte EP45-UD3P v1.1 ~ F9--EVGA 9800GT @ 700/1750/1100--8GB Gskill 1066How to Enable ICH RAID on Existing VISTA Systemcourtesy of Dr. Nathan
Hmm, I can validate fine here?
I just pushed thru a few on 4-28-09 >>
http://forums.tweaktown.com/f69/post...tml#post296146
~ X58 BCLK WORLD RECORD ~
~ <Mushkin Enhanced Alpha Team ~
* BIOS Templates (Give Us Your Settings Please) *
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline ~ 996587 HP
Crucial Reviews - C300 SSD ~ Blue Tracer DDR3 ~ Ballistix DDR2
X58 BIOS LED Debug Codes
I wonder what I'm doing wrong here, lol. Time for some heavy duty googling....
Originally Posted by Alex St. John
Best Quote Ever...Originally Posted by Psycho101
Intel E8400 EO@445x9--Gigabyte EP45-UD3P v1.1 ~ F9--EVGA 9800GT @ 700/1750/1100--8GB Gskill 1066How to Enable ICH RAID on Existing VISTA Systemcourtesy of Dr. Nathan
Problem was solved simply. Answer: Hotmail accounts will not allow for verification. I had to use my ISP email address.
3GHz @ 400 x 7.5
Originally Posted by Alex St. John
Best Quote Ever...Originally Posted by Psycho101
Intel E8400 EO@445x9--Gigabyte EP45-UD3P v1.1 ~ F9--EVGA 9800GT @ 700/1750/1100--8GB Gskill 1066How to Enable ICH RAID on Existing VISTA Systemcourtesy of Dr. Nathan
and now it doesn't work any more.... hahahahahaha
Originally Posted by Alex St. John
Best Quote Ever...Originally Posted by Psycho101
Intel E8400 EO@445x9--Gigabyte EP45-UD3P v1.1 ~ F9--EVGA 9800GT @ 700/1750/1100--8GB Gskill 1066How to Enable ICH RAID on Existing VISTA Systemcourtesy of Dr. Nathan
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks