Best place for this sorta information can be found here. martinsliquidlab.org
guys,
I was wondering if anyone knows a rul of thumb on the wattage a radiator can cool. i found on 2 sites that a 360 could remove 100 to 300 watts of heat depending on fan speed. has anyone see anything else? that tells this??
if this is true then 1 120 single would be 33 to 100 and 240 rad would be 66 to 200. but would like to know if anyone knows anything different for sure???
Best place for this sorta information can be found here. martinsliquidlab.org
Main Rig
Gigabyte z77x-UP5 TH Bios F11
i7-3770K batch 3213B478 Costa Rica @ 4.8Ghz w/o HT 1.29v <- R.I.P
i7-3770k batch L223B781 Malay @ 4.7ghz w/o HT 1.29v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F17
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
BSOD ERROR CODES
Gigabyte-bios-templates-give-us-your-settings Thx Lsdmeasap
Gigabyte-latest-bios
Gulftown-bloomfield-lynnfield-clarkdale-overclocking-guides-1156-1366
Gigabyte-x38-p35-p965-ds-dq-s3-overclocking-general-bios-tweaking-guide
latest-overclocking-programs-system-info-benchmarking-stability-tools
Corsair Force GT 120GB Sata3 SSD benchmarks on X58A-OC Marvell 9182 Sata3
Gigabyte Modified Bios
I am in NO way affiliated with Gigabyte.
If you use a BIOS I Modified, you do so at your own Risk and Assume Full Responsibilty !
Thanks for the link a lot of good info but not what i want to know.
What radiators were you looking at. There is a lot to think about when choosing a radiator, 1. Fin density, 2. rad thinkness 3. fan/fan speed 4. Water pressure.
See here Alphacool NexXxoS XT45 360 Radiator « martinsliquidlab.org. Scroll down to the graph and see what is needed for this rad to cool 300 watts of heat.
Main Rig
Gigabyte z77x-UP5 TH Bios F11
i7-3770K batch 3213B478 Costa Rica @ 4.8Ghz w/o HT 1.29v <- R.I.P
i7-3770k batch L223B781 Malay @ 4.7ghz w/o HT 1.29v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F17
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
BSOD ERROR CODES
Gigabyte-bios-templates-give-us-your-settings Thx Lsdmeasap
Gigabyte-latest-bios
Gulftown-bloomfield-lynnfield-clarkdale-overclocking-guides-1156-1366
Gigabyte-x38-p35-p965-ds-dq-s3-overclocking-general-bios-tweaking-guide
latest-overclocking-programs-system-info-benchmarking-stability-tools
Corsair Force GT 120GB Sata3 SSD benchmarks on X58A-OC Marvell 9182 Sata3
Gigabyte Modified Bios
I am in NO way affiliated with Gigabyte.
If you use a BIOS I Modified, you do so at your own Risk and Assume Full Responsibilty !
Thanks that is what i was looking for and i missed it when i looked so thank you again. I am trying to build a exteme cooling system Chilled water cooling TEC's and i am in the planning stage so i am trying to get all the information i can on everything...!!!!
Your welcome.
Good luck with it. Post some pics of it if you can when your all done or as your working it.
Main Rig
Gigabyte z77x-UP5 TH Bios F11
i7-3770K batch 3213B478 Costa Rica @ 4.8Ghz w/o HT 1.29v <- R.I.P
i7-3770k batch L223B781 Malay @ 4.7ghz w/o HT 1.29v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F17
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
BSOD ERROR CODES
Gigabyte-bios-templates-give-us-your-settings Thx Lsdmeasap
Gigabyte-latest-bios
Gulftown-bloomfield-lynnfield-clarkdale-overclocking-guides-1156-1366
Gigabyte-x38-p35-p965-ds-dq-s3-overclocking-general-bios-tweaking-guide
latest-overclocking-programs-system-info-benchmarking-stability-tools
Corsair Force GT 120GB Sata3 SSD benchmarks on X58A-OC Marvell 9182 Sata3
Gigabyte Modified Bios
I am in NO way affiliated with Gigabyte.
If you use a BIOS I Modified, you do so at your own Risk and Assume Full Responsibilty !
When it comes to fans and rads, ambient air and water temperature plays a HUGE role as well. There a boat load of factors involved, and it would probably take an engineering degree to sort them all out. Which is why there are a lot of disparity in the "facts".
Consider this, how effective do you think 30c air would be cooling 32c water? As compared to say 22c air? the cooler air will be more effective at cooling more "watts"
in the end, it comes down to experience which comes from trial and error. I really don't think you will find the "perfect" solution right off. Hell I'm still tweaking, and probably always will.
Using 100-300w is strictly a guideline. And even the chart from martinsliquidlab was simply a snapshot of what worked for him at that time in those particular situations.
As with any "troubleshooting": Change, Monitor/test, record.
And yes, send us pics of your setup! I would love to get feedback on what you have done.
Syn.
I plan on posting lots of pics and feedback with what I do when i get the system. it will be a couple of weeks as i will not get my bonus for a couple of weeks then i will order everything i need and start posting these.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks