TweakTown Forums  

Go Back   TweakTown Forums > Tweaking Discussion > Cooling

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 02-26-2003, 02:47 AM
Senior Member
 
Join Date: Jan 2003
Posts: 968
Default

OK, I was a bit bored, and thinking about lowering my CPU temps (Will this EVER stop?), and came up with this mod...Now, I'm not sure if I am actually getting the full CFM from both fans, but the one closest to the CPU is reading 300RPMs faster than it was before, and the CPU temp went down by 1-2 degrees Celsius without adding any noticeable noise to my system (25C/31C at stock idle). I made the 80MM adapter for the Globalwin copper HS out of sheet copper to get the fan closer, and I figured this may be helping the cooling as well. :cheers:
__________________
<img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
Revenge is just a respawn away....Pagosa LAN Parties
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 02-26-2003, 03:22 AM
Senior Member
 
Join Date: May 2002
Posts: 2,488
Send a message via AIM to FLaCo
Default

Cool pic...so what are the temps?
__________________
- Damien
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 02-26-2003, 03:26 AM
Senior Member
 
Join Date: Jan 2003
Posts: 968
Default

Quote:
(25C/31C at stock idle)
__________________
<img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
Revenge is just a respawn away....Pagosa LAN Parties
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 02-26-2003, 12:56 PM
Senior Member
 
Join Date: Jan 2003
Posts: 968
Default

.....and 27C/41C overclocked to 2048MHz and loaded...:D
__________________
<img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
Revenge is just a respawn away....Pagosa LAN Parties
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 02-26-2003, 12:59 PM
Member
 
Join Date: Feb 2003
Posts: 419
Send a message via Yahoo to 0R1()N
Default

lol we can have a fan stacking contest...who can get the most fans to stack on the processor:idea:
__________________
I shall stir the gates of hell once more and stare into the jaws of death and laugh, for I will know fear no more.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 02-26-2003, 01:06 PM
Senior Member
 
Join Date: Jan 2003
Posts: 968
Default

...I do have about 5 more fans laying around, and if I steal those 5 new blue LEDs from my girlfriends machine....:p
Hey, I said I was BORED! Sheesh Orion....riding me like a frickin Schwinn...
__________________
<img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
Revenge is just a respawn away....Pagosa LAN Parties
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 02-26-2003, 11:48 PM
RDR RDR is offline
Moderator
 
Join Date: Nov 2001
Location: Ontario, Canada
Posts: 1,017
Default

I read on article on this subject once...the overall result of it was (if I remember correctly) - that in order to obtain a significant increase in air flow from stacking 2 fans together they had to turn in opposite directions.......there were some other points as well, but that was the major one.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 02-27-2003, 12:22 AM
Senior Member
 
Join Date: Jan 2003
Posts: 968
Default

Yeah, I didn't really figure that I'd get the full benefit from BOTH fans. Wish I could find that article. Both of those fans are Globalwins, the lighted one is the original that came with the HS, rated at 4000RPM and 55.2CFM, and the top one is from another HS/F combo, rated at 2700RPM and 29CFM....Unless my MOBO is lying to me, they're running at 5300 and 3400RPM respectively...
Well, it's just an experiment anyway until I can slap the TT Smartfan II that I ordered on there...When I do, I'll test my temps and speeds again and post them in this thread. :thumb:
Maybe I'm geeking out a bit too much on this subject, but it makes me wonder, if what you say is true....shouldn't exhaust fans turn in an opposite direction from intakes? Counter-clockwise vs. clockwise?
I've done my best, as I'm sure most have, to "eyeball" an airflow path through the case, given the restrictions on space and placement of fans possible. Are there any articles on wind tunnel tests done on cases? I'd thought of placing pins with silk threads in strategic locations inside my case in order to determine just where the air IS flowing.....Until I can design a case completely from scratch, I'll just have to use the general "rules of thumb" like everyone else....For now, I'm not complaining as I've got decent temps without any side fans or blowholes. :cheers:
__________________
<img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
Revenge is just a respawn away....Pagosa LAN Parties
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 02-27-2003, 04:03 PM
Senior Member
 
Join Date: Dec 2002
Location: Western face of Mt.St.Helens
Posts: 3,060
Send a message via Yahoo to dryadsoul
Default

Nice clean application of pc tweakin' ther Wordbiker.......and as
a fan is a fan is still just a fan......applying them to task of intake
and or exhaust means simply turning them so that the Wired side
faces the intended direction of air flow. And stacking them,while
acomplishing short lived success, will burn out the top most one
at far faster rate.......hence the reason they appear to run at different speeds. Kinda like stacking Jet Turbines.....although
it increases the amount of cold air induction.....it's not very cost
effective in the long run.
And if you know any touring rock bands or money isn't a crucial issue for you, borrow/rent a smoke pot for testing Wind tunnel/case air flow........maybe if you're realy realy bored one of these days/nights {they all seem to just run together for me}
ya might try inventing the first Colored Canned Air so we can
all test pc case air flow without the probs:wow: :rofl: : peace2:

Least i forgettaboutit, with the dual fan PSU being soooo close
to the CPU HSF {since your not using a true Full Tower case}
you'll also find that that double stacker will **** up the PSU fan
as well....my enermax P365 PSU isn't affected by the Alpha 8045's
Antec Tornado since it only kicks the PSU lower fan on at Higher
Temps/shifts to faster speeds.......my system never reaches Temps over 90 Fahrenheit.......so it's not an issue for me.
__________________
Happiness isn't something you experience; it's something you recall.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 02-27-2003, 04:34 PM
Senior Member
 
Join Date: Sep 2002
Posts: 1,636
Send a message via Yahoo to kane2g
Default

Quote:
ya might try inventing the first Colored Canned Air so we can
I got some smoke flare things that i picked up while on a trip to Georgia in one of the firework places. its good for about 30sec and has cool camo smoke. they were like 50c each or case of 100 for $25, so i got a 100 of them :D
i think those would be pretty good for wind tunel testing systems intake/output. I wont do it cuz i aint got no window.
:2cents:
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +8. The time now is 07:30 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.2
Copyright (c) Tweak Town Pty Ltd