Fan size

Moctezuma05 · #1 (**permalink**) 08-15-2002, 09:42 AM

I need to know what size fan I wouls need to hook up in this place. For comparison the black part above is a side of an 80MM fan. thanks all if u need a bigger picture i will post one just didnt want load times to be too bad :shoot3: :shoot2:

Wiggo · #2 (**permalink**) 08-15-2002, 09:52 AM

It's a bit hard to say if it's a 60mm or 40mm from that pic but just measure how for apart (center to center) the corners holes are apart down one side (where the screws would attach the fan) and 40mm fan would have its holes 32mm apart and a 60mm would be 50mm apart. ;)
<center>:cheers:</center>

SegiY · #3 (**permalink**) 08-15-2002, 02:01 PM

BAH! cut it out and put a 80mm, or a 92mm OR A 120mm

E^vol · #4 (**permalink**) 08-18-2002, 01:05 AM

Quote:

Originally Posted by SegiY

BAH! cut it out and put a 80mm, or a 92mm OR A 120mm

So, are you saying that "size matters" ?? :laugh: : peace2: :laugh:

Moctezuma05 · #5 (**permalink**) 08-18-2002, 01:21 AM

I wish I could put a bigger fan in there but theres just no room for it I may be able to squeeze an 80 in there just need to mesure i out an see if it would fit.

Wiggo · #6 (**permalink**) 08-18-2002, 08:25 AM

Well if ya can't get an 80mm in there then a 60mm I reckon will go, maybe even on of them new 70mm jobs or enlarge the 80mm already there to a 92mm one. ;)
<center>:cheers:</center>

Moctezuma05 · #7 (**permalink**) 08-18-2002, 09:07 AM

Theres no 80 in there yet i just held up above the other place like for comparison.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)