![]() |
|
|||
|
When I installed my Volcano 6cu onto my athlon I removed the thermal material. Is this why it runs VERY hot? Also, what can I do/add to make it seem like I do have thermal material? Click here to see what I removed. It's the black stuff in the photograph. |
|
|||
|
I used think that opening my case would have a good affect to my cooling of my components. I figured out thats not the case. Effective case cooling only occurs when you have a good intake and exhaust fans cooling your case. Well placed in and out fans will cool your system dramatically. A lack of that might be your heat problem as WiGGo pointed out. I have a two fans on the side, three in the front dragging air in and three in the back pushing hot air out. Its made quite the difference. My system actually gets warmer when i take off the side panel. Anyhow, try that...fans are somewhat affordable...and can go a long way when it comes to cooling your system down.
__________________
- Damien |
|
|||
|
lol yea same here flaco:D
me cpu temp actually goes up 2 degrees if i take off the side...i guess bcos with the lid on there's a 120mm on the side pumping fresh air straight into the delta on my mcx:cheers:
__________________
Epox 8RDA+ xp2100@ 2.46ghz (214x11.5) Radeon 9700 pro 512mb corsair xms3200 5-3-2-2@214 512k ADSL SLK-800 HSF SB Audigy + Ultrasone HFI650DVD modded case: 2x120mm,4x80mm 40GB Seagate Barracuda 4 Sony trinitron 17" Antec Trupower 380W 3D mark2003 : 5050 |
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|