Pentium dual core e6300 2.8ghz(45nm) thread

[xdan]

In this thread you can post your overclocking results with PENTIUM DUAL CORE E6300/E6500/E6500K 45nm...2mb cache
Hi .to everyone .i have an Pentium E6300(2 months now) and a Asrock P45DE, and i have to say that this E6300 is great and also my cheap 80$ MB handles 500FSB...
Asrock P45DE
ZEROTHERM FZ120...
some poor memory
E6300 2.80ghz
Batch : Q910A334
Made in Malayezia
Vid: 1.275v ...it seems that all E6300 have kind of this high vid(but not judge this...)
3.6ghz voltaj stock ( 1.240v load)


3.920GHZ 1.360v idle,-1.312v load FSB 490
http://img30.imageshack.us/img30/9745/490fsb.jpg
4.120ghz 1.4v load

512 FSB validation..memory stops me
CPU-Z Validator 3.1

[avkdm]

Hi,
I have almost the same mobo as you (P45XE).
I have overclocked to 3.6 as you have but my voltage is 1.3625 in BIOS.
I tried your settings but that did not work. Do you have the bootup problem if you turn the power off at the wall?
Mine always boots twice if I do this.
Also what do you set your ram at?

[xdan]

Put your rams in raport 1:1 with your FSB, i guess you DISABLED SPEEDSTEP and SPREA SPECTRUM, raise NB VOLTAGE to 1.28v and put FSB STRAPP to 400(1600)....i don't know whar rams do you have(if they can overclock)
May be you don't have such a good Cpu, if doesn't work what i sad before, raise the Cpu, voltage to 1.40625v in bios(1.368 real) an see what happens..

[Phil K]

Odd thing.
I'm using Orthos to test my seemingly quite stable 3400 overclock on my E6300, but it is showing on Orthos as 4200 !
Why's this ?