ep45-ud3p vista installation driver issue sata/ide

[jsnrkd]

Hi all, I have a ga-ep45-ud3p motherboard, 1 sata wd velociraptor hd, 1 ide nec dvd drive(nec 3520a) and i'm having some issues when trying to install vista business x64. When I boot from the vista dvd the installation asks me for drivers to locate my hard disks but i've tried everything to get it to recognize my drive. I've actually gotten it to install before and had the same issue but can't get it to work again.(and actually it's still installed but i deleted the boot loader but I can't get the repair function to recognize the disc either)

In the bios i have the following settings
SATA RAID/AHCI Mode: disabled
SATA Port0-3 Native mode: Enabled

I've got the sata hd plugged into the yellow intel ich10 sata0 port and the dvd drive plugged into the ide port(set to master).

Which drivers should I be selecting in the vista prompts and what motherboard settings should I use?

[jsnrkd]

Found some JMicron drivers that made it work but I wish I could have saved the boot loader :/

[Lsdmeasap]

The J.Micron drivers are for the Gigabyte/Purple Slots, not the Intel/Yellow slots....

So I have no idea how that helped you out?

And Vista would not need a driver, unless you had been using the Purple ports as it includes it's own SATA drivers already

You mention bootloader, so not sure what you are trying to do or redo here but what you described above is not what corrected the issue really unless you are/were using the Purple ports

Glad you got going though

[jsnrkd]

I used the JMicron drivers for the IDE DVD drive.