TweakTown Forums  

Go Back   TweakTown Forums > General Discussion > Publication Discussion

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 06-26-2008, 10:36 PM
Moderator
 
Join Date: Nov 2006
Location: TweakTown Forum
Posts: 1,136
Default Areca ARC-1231ML SATA RAID 6 Controller

Please feel free to comment about our story entitled "Areca ARC-1231ML SATA RAID 6 Controller"
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 06-28-2008, 01:32 AM
Junior Member
 
Join Date: Dec 2003
Posts: 1
Default Re: Areca ARC-1231ML SATA RAID 6 Controller

Are we likely to see any Raid 5/10/6 benchmarks with this card as these are the common arrays created when enthusiasts purchase a card of this magnitude?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 07-07-2008, 12:00 AM
Junior Member
 
Join Date: Jul 2008
Posts: 1
Default Re: Areca ARC-1231ML SATA RAID 6 Controller

I desperately need some help! I purchased the Areca 1222 after owning the 1210 and having no issues. I had the 1210 with 4 x 150 Raptors in a Raid 0 with two volumes, dual booting with Vista 32 and 64. All was bliss! I have the same motherboard- Evga 790iUltra SLI. Same memory- Patriot Vipor C7 1600 DDR3. Same PSU-Ultra X3 1600 Watt. Same Video Cards- 9800 GTX's.

So I sold of 1210 and 150 Raptors. I bought the Areca 1222 and 4 Velociraptors. Set up Raid 0 with two 600 GB Volumes and dual boot with Vista 32 and 64. Install went fine using latest Vista Drivers on website.

I also tried all of the same with two new GTX 280's.

All is fine and will the PC will sit and run all day, with no problems. When I install the Video Card drivers (for 280's- Also same problem with 9800's but will only refer from now on to 280s' as that is the card I will be using) they load and then the trouble. 177.44 FREEZE 177.39 Freeze 177.35 Freeze !!

I called Areca-- called back and working on it but don't know what to say.
I called Western Digital- maybe you could return all of the Velociraptors as you might have some bad sectors. I switched to new ones.

Called Vendor here in States--they sent me the the ARC 1680 ix-12 and I still cannot get video drivers to load. They suggested going with Adaptec 5805.

My 1210 was very good and never a problem. I am using the same Vista Drivers now that I used with them. I even put the 9800 GTX's in with same driver to eliminate the 280 variable. All in all two changes. 1210 changed to the 1680 ix-12 and 4 150 Raptors changed to 4 Velociraptors.

I need some wisdom. No one has been able to solve this "Mystery" and say it should all be fine. So what am I missing. I hope the reviewer of this Areca review can see this. I could use your help. Thanks gbakmars

Last edited by gbakmars; 07-07-2008 at 12:05 AM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +8. The time now is 11:46 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.2
Copyright (c) Tweak Town Pty Ltd