![]() |
|
|||
|
I have an old intel mobo D845EBG2 ![]() I have one 80gb WD Hd installed I can see it in the bios but thats all I get, I am doing this because my pc wont boot to windows I believe reinstalling xp will fix this.. Please help thanks in advance |
|
||||
|
Is this a SATA Drive or IDE? What do you have those settings per that info set to in the BIOS?
If it is an IDE Drive be sure you have the jumper in the correct place, and the drive in the proper place on the cable. Master is the end of the IDE Cable, slave is the middle. Can you test this drive in another PC to be sure it is OK? Is this a New Drive? If it is brand new, you may just need to set it up with the Manufacturer tools. Download them here, diagnostics and the tool to setup the drive for first use. WD Support > Downloads > SATA Hard Drives > WD Caviar Blue / SE / SE16 (SATA II) That is a general link, pay no attention to the drive listed the software is the same for all drives. You want the Lifeguard tools to setup the disk for first use, some disks require this before you can use them as it sets the disk active and formats it.
__________________
|
|
|||
|
Its an Ide drive and not brand new. the bios is pretty much set to optimal defaults.
PC used to work but it just wont boot anymore to windows so Im just trying to get my pc running again by reinstalling the xp then I get that blue screen I will test this hard drive as soon a I can.I'll download the tools as well. thanks so much you're the best |
|
||||
|
Sorry to hear, but glad to see you found the issue. Good luck with the reinstall once you get your new drive. Post back anytime if you need further help or just to update us on the progress of things.
Good luck on the reinstall
__________________
|
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|