Gigabyte M/b & Memory Problem?

gatonini · 10-02-2007, 12:35 AM

HI ALL , i bought recently my computer (see my signature) and from the begining in bios ver f4

in DDR18v was red and fail, i updated bios with ver f6 the DDR18v was ok but the memory timings were not the correct 5-5-5-15 but something else. i changed the timing values with the above but when i try to play a game such as GRAW2 or Americas Army after 10-15min it freezes. Can this be an issue of incompatible memory, bad setup timings and volt or something else?

Any help will be appreciated!

ps i have installed the latest drivers for graphics & sound.

**casecutter** · 10-07-2007, 09:22 PM

Set the memory voltage to the proper value and ignore the DDR18v fail since it will ALWAYS say that when you up the voltage and overclock or change timings.

gatonini · 10-17-2007, 06:25 AM

I changed the ram voltage to + 0.5v put manually 5-5-5-15 ram timings but after reboot my memory timings were 5-5-5-18, and keep crashing.

Then i got only 1 stick of 1gb memory and put settings in auto and

now reads 5-7-7-24.

what can i do?

HemiRick · 04-08-2008, 06:10 AM

+.5V!!! that's to 2.3 back off to 2.1 or 2.2V