TweakTown Forums  

Go Back   TweakTown Forums > Hardware Discussion > Memory

Memory RAM, SD, Flash, etc.

Reply
 
LinkBack Thread Tools Rating: Thread Rating: 1 votes, 1.00 average. Display Modes
  #1 (permalink)  
Old 09-03-2009, 10:49 PM
Junior Member
 
Join Date: May 2009
Posts: 6
Default How much memory for ex58 ud3r?

Im currently using core i7 920 with ud3r motherboard running on 3 x 1GB corsair ram. I've not overclocked my system.
How much memory can it take at maximum tri channel use and which memory module would you recommend? I've found Kingston and Crucial kits (12GB/16GB/24GB) but are there other reliable brands?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 09-07-2009, 12:12 PM
Lsdmeasap's Avatar
GIGABYTE Forum Mod
 
Join Date: Jan 2008
Posts: 15,528
Default Re: How much memory for ex58 ud3r?

I would say 6-12Gb would be easy to use, and still allow you to overclock. Much more than that is where you might have issues with your overclocks and even may possibly need to underclock the ram or use loose timings.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 10-21-2009, 08:42 PM
Junior Member
 
Join Date: Oct 2009
Location: india
Posts: 1
Default Re: How much memory for ex58 ud3r?

Intel® Core™ i7 Processor and X58 Chipset support


The EX58-UD3R was designed specifically to take advantage of the raw power of the next generation Intel® Core i7 processors and the Intel® X58 Express chipset, whose new evolution in computing architecture is able to deliver an amazing performance break through from past processor generations. Replacing the Front Side Bus is the new Quick Path Interconnect, or QPI, whose 25.6 GB/sec transfer rate (double the bandwidth of the 1600MHz FSB) eliminates the communication bottleneck between the processor and chipset.
The Intel® Core i7 processors also feature an integrated memory controller inside the processor die and support 192bit 3-channel DDR3 memory that delivers a 50% memory bandwidth enhancement and lower memory latency for incredibly fast memory access. Additionally, The EX58-UD3R features Intel® Turbo Boost Technology, which is able to power down idle processor cores and dynamically reroute the power to the active cores for significant performance boosts, and at the same time, maintain greater energy efficiency.

Geeks
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 10-22-2009, 03:12 AM
Psycho101's Avatar
Senior Member
 
Join Date: Apr 2009
Location: J'Habite En Angleterre
Posts: 1,822
Default Re: How much memory for ex58 ud3r?

Quote:
Originally Posted by webappln View Post
Intel® Core™ i7 Processor and X58 Chipset support


The EX58-UD3R was designed specifically to take advantage of the raw power of the next generation Intel® Core i7 processors and the Intel® X58 Express chipset, whose new evolution in computing architecture is able to deliver an amazing performance break through from past processor generations. Replacing the Front Side Bus is the new Quick Path Interconnect, or QPI, whose 25.6 GB/sec transfer rate (double the bandwidth of the 1600MHz FSB) eliminates the communication bottleneck between the processor and chipset.
The Intel® Core i7 processors also feature an integrated memory controller inside the processor die and support 192bit 3-channel DDR3 memory that delivers a 50% memory bandwidth enhancement and lower memory latency for incredibly fast memory access. Additionally, The EX58-UD3R features Intel® Turbo Boost Technology, which is able to power down idle processor cores and dynamically reroute the power to the active cores for significant performance boosts, and at the same time, maintain greater energy efficiency.

Geeks
Very nice, but that has absolutely zero information for the OP....
__________________
Lian Li PC-A09 Case (Full Aluminium)
Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
EP45-UD3P v1.0 @ F10e
E7400 @ 9.5 x 411, 3.9GHz, 1.425v ??c idle (stuck DTS sensors) and 57c full load (23c ambient)
TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
2x2GB Corsair XMS2 PC2-8500, @ 5-5-5-15, 1093-DDR, 2.14v tRead 7 stable
2 x HD4850 512MB @ 715 Core / 2130 Mem. CrossFireX
Scythe Musashi twin 100mm fan cooler, 40c Idle and 65C FurMark "Xtreme Burning Mode"
Intel X25-M 80GB SSD (OS and Programs) 250MB/s Read 75MB/s Write and WD Caviar Blue 640GB (Storage, Downloads, Temp Files & Folders, Page File etc)
Noctua 1300RPM 19dB case fans
Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

This rig loads Windows 7 from the end of AHCI detection to a usable desktop in 13 seconds.

System has passed 24 Hours Prime Blend, 12 hours of both Large and Small FFT and 50 Runs of Intel Burn Test (Maximum Stress)
http://valid.canardpc.com/show_oc.php?id=609332
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +8. The time now is 09:43 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.2
Copyright (c) Tweak Town Pty Ltd
You Rated this Thread: