|
08-20-2009, 03:43 AM
|
||||
|
||||
Re: Overclocking Intel Dual Core E5200
Set your own tRD to 8-9 for now, maybe this is the issue.
That ore you are just not giving enough Vcore
__________________
    
|
|
08-20-2009, 03:52 AM
|
||||
|
||||
|
Re: Overclocking Intel Dual Core E5200
Here is the screenshot
[IMG]http://forums.tweaktown.com/%5BURL=http://img269.imageshack.us/i/****q.jpg/%5D%5BIMG%5Dhttp://img269.imageshack.us/img269/6299/****q.th.jpg%5B/IMG%5D%5B/URL%5D[/IMG]
|
|
08-20-2009, 04:43 AM
|
||||
|
||||
|
Re: Overclocking Intel Dual Core E5200
|
|
08-20-2009, 05:24 PM
|
||||
|
||||
|
Re: Overclocking Intel Dual Core E5200
Ech these settings worked for me also getting 3.33Ghz ( 266 x 12.5 ) with much higher Vcore.. if fail again, we should wait for lsd.
 MB Inteligent Tweaker (M.I.T.) Bobust Graphic Booster . . . . . Auto CPU Clock Ratio . . . . . . . . . . 11 X Fine CPU Clock Ratio . . . . . . . +0.5 CPU Frequency 3.06GHz (266x11.5) Clock Chip Control Standard Clock Control CPU Host Clock Control . . . . . Enabled CPU Host Frequency(Mhz) . . . 266 PCI Express Frequency(Mhz). . 100 C.I.A.2 . . . . . . . . . . . . . . . . Disabled Advanced Clock Control CPU Clock Drive . . . . . . . . . . 800mV PCI Express Clock Drive . . . . . 900mV CPU Clock Skew . . . . . . . . . . 0ps MCH Clock Skew . . . . . . . . . . 0ps DRAM Performance Control Performance Enhance . . . . . . . . . . . Standard (G)MCH Frequency Latch . . . . . . . . . Auto System Memory Multiplier (SPD) . . . . . 3.00A Memory Frequency(Mhz) 800 . . . . . . . 800 DRAM Timing Selectable (SPD) . . . . . . Manual Standard Timing Control CAS Latency Time 5 . . . . . 5 tRCD 5 . . . . . . . . . . . . . . 5 tRP 5 . . . . . . . . . . . . . . . 5 tRAS 18 . . . . . . . . . . . . . 18 Advanced Timing Control tRRD 3 . . . . . . . . . . . . . . . . Auto tWTR 3 . . . . . . . . . . . . . . . Auto tWR 6 . . . . . . . . . . . . . . . . Auto tRFC 52 . . . . . . . . . . . . . . . Auto tRTP 3 . . . . . . . . . . . . . . . . Auto Command Rate(CMD) 0 . . . . . Auto Channel A . . . . . << Static tRead 8 or Auto // Try both Channel B . . . . . << Static tRead 8 or Auto // Try both Mother Board Voltage Control CPU CPU Vcore . . . . . . . . . 1.30000V << if worked, try lower CPU Termination . . . . . 1.240V CPU PLL . . . . . . . . . . . 1.520V CPU Reference . . . . . . . Auto MCH/ICH MCH Core . . . . . . . . . . . . . 1.240V MCH Reference . . . . . . . . . Auto MCH/DRAM REference . . . . . Auto ICH I/O . . . . . . . . . . . . . . . Auto DRAM DRAM Voltage . . . . . . . . . . 1.900V DRAM Termination . . . . . . . Auto Channel A Reference . . . . . Auto Channel B Reference . . . . . Auto ////////////// Update your BIOS to F9 also, " http://www.gigabyte.com.tw/Support/M...2846#anchor_os " Last edited by Defined; 08-20-2009 at 05:34 PM.
|
 |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
