|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
08-09-2009, 04:17 AM
|
|||
|
|||
EP45-DS4 + E8400 - quest for 500FSB
UD3P is so much more better for overclocking... Oh well. Here comes even tougher nut to crack. The BIOS has quite different values for the most important settings in M.I.T., and no Loadline calibration. Also memory straps seem to be working differently on this board. Anything over 450FSB seems a no go so far, but not giving up. Pumping everything to Auto let me boot into Windows with 500 FSB at least (Prime failed immediatelly as expected). If I could do 485 with all defaults on EP35, then it sure as hell MUST be doable with this one, too. Currently experimenting with 2.00D strap and 450 FSB to get some basic idea. If there is anyone here who has at least some experience with this board, I will appreciate any tips.
__________________
Gigabyte EP45-UD3P 1.0 F10e, E8400@5??x7.5, 2x2GB Corsair Dominator DDR2/1066 - 8500C5D, Sapphire ATI 4870+Accelero S1rev2+Noctua NF-P12-1300 (slow), Samsung Spinpoint F1 HD103UJ, Enermax MODU82+ 425W, Antec P182 case, Samsung Syncmaster 215TW, Windows 7 64bit     
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
