|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
12-11-2008, 02:55 PM
|
|||
|
|||
EX58-UD5, intel matrix storage installed, how to enable hot swap
I managed, somehow, installed the intel matrix storage driver, and the HDD now working properly in SATA Generation 2 mode. the intel matrix storage console also installed and works fine. now the problem is that I could not use the hot swap function. the HDD still can not be hot-plug out......but the NCQ is working now..... previously, the windows Xp installed without AHCI driver, so it was not working well.... now I managed install the AHCI driver.... but the hot swap function could not be enabled... a bit strange. can anybody help a little bit? many thanks!     
|
|
12-12-2008, 05:50 PM
|
||||
|
||||
|
Re: EX58-UD5, intel matrix storage installed, how to enable hot swap
Do you have AHCI Enabled in the BIOS? Can you try this and see if it works, if not you may have to do a clean install properly >>>
HotSwap!
__________________
|
|
| Bookmarks |
| Tags |
| ahci, ex58-ud5, hot swap, sata |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
