|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
05-04-2009, 12:28 PM
|
|||
|
|||
GA-EG45M-UD2H & Memory
This is my first time posting and I hope someone can assist in selecting a MB. I have looked at the GA-EG45M-UD2H and hopefully someone has this board and can let me know if it's a stable board. I would also appreciate if you can tell me which memory sticks are being used with it. TIA for any assistance...     
|
|
05-08-2009, 01:48 PM
|
||||
|
||||
|
Re: GA-EG45M-UD2H & Memory
What memory and CPU do you plan to use? What is your price range incase I think another board would be better for you?
Do you have to have Micro ATX board, and onboard Graphics? Just checking
__________________
|
|
05-09-2009, 03:20 AM
|
|||
|
|||
|
Re: GA-EG45M-UD2H & Memory
I purcahsed the GA-X48-DS5 instead with 2x1 sticks of Mushkin 6400 memory. I installed everything and as soon as i power up I hear this very loud beep that is almost like a shriek. I turned it off right away just in case. I only have a video card and memory installed as I wanted to boot before I installed any other component. The noise was for about 45 secs and until i shut off theit would not go away. Any idea what it could be..I was thinking the zalman cooler or cpu are not on correctly.
__________________
GA-X48-DS5 MoBo 700W Thermallake PSU EVGA 8800GT Video Card Q6600 Quad Core CPU 2/1 G Mushkin HP2 6400 996603 2 WD 640 G HD (Sata) Pioneer DVD-RW
|
|
05-09-2009, 05:01 PM
|
||||
|
||||
|
Re: GA-EG45M-UD2H & Memory
I would need to hear the beep, can you record it and upload it somewhere for me?
Was it Many Multiple short beeps? If so, then it is often memory settings to low, I would try to clear the CMOS, here is my method for doing that >> BIOS Flashing - A "How To ~ Qflash Guide" Is this all new, not used? Just checking What PSU and GFX Card are you using anyway? Which Mushkin Model #?
__________________
|
|
05-09-2009, 11:41 PM
|
|||
|
|||
|
Re: GA-EG45M-UD2H & Memory
Senor LDSMEASAP,
Thanks for yor assistance so far...the shriek went away when I connected power to the video card (duh) and I was able to get to Bios. I am trying to find bios settings and memory timings for the board so I can finally load my OS. Most of the Bios settings are in the manual but I want the best for my setup. All of my specs are in my sig, but I will copy them below. I am not trying to overclock, just get the standard settings according to my cpmponents. Again thanks for your valuable time... GA-X48-DS5 MoBo 700W Thermaltake Truepower PSU EVGA 8800GT Video Card Q6600 Quad Core CPU Zalman 9700 Cooler 2/1 G Mushkin HP2 6400 996603 2 WD 640 G HD (Sata) 2 Pioneer DVD-RW's (Sata)
__________________
GA-X48-DS5 MoBo 700W Thermallake PSU EVGA 8800GT Video Card Q6600 Quad Core CPU 2/1 G Mushkin HP2 6400 996603 2 WD 640 G HD (Sata) Pioneer DVD-RW Last edited by des711; 05-09-2009 at 11:47 PM.
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
