GA-EP45-DS5 G-SATA Problem! Please Help!

albarth · #1 (**permalink**) 07-09-2008, 04:05 PM

I have some very strange behavior with the Gigabyte SATA-Controller.
The DVD-Burner is not recognized at all, in no port. The 2 Samsung F1 harddisks are only recognized when plugging into channel 0 and channel 1 at the same time. Smart Backup is disabled currently. When entering G-Bios, there's just one disc with 2 TB size (very odd). In IDE mode, no single disc is recognized.

After updating to F7 BIOS, the RAID Control Mode is not available any more. G-Bios is not available also. The two discs are recognized when plugged in in C0 and C1 (as one with Smart Backup enabled now), a single disc is still not recognized. With SB disabled, no disc is detected. Channel 2 and Channel3 seems to be totally dead. I've tried all different Bios settings for this...

The DVD-Burner is also not detected in any SATA channels.

For the Intel Southbridge, all SATA ports are working very fine. But I want to use the G-SATA since I want to build up a 6-disc RAID5 on the Intel controller.

My wish is to have a "safe" raid 0 (perhaps with or without smart backup function) PLUS the DVD-Burner, all three on G-SATA ports. Isn't that possible?

Any help? Any suggestion?

**Lsdmeasap** · #2 (**permalink**) 07-09-2008, 04:10 PM

Wish I could help ya man, But I have yet to get my hands on a P45 so you will have to Wait for Janus to reply here

albarth · #3 (**permalink**) 07-10-2008, 02:01 AM

Thanks dude
is there any kind of technical white paper about smart backup? It seems to be so smart that I don't have any clue how to recognize disk failure or how to rebuild after a crash. Is this documented anywhere?
Greetings Al

albarth · #4 (**permalink**) 07-10-2008, 02:20 AM

ok I have some news
I've jumped back to F5 bios version. This brought back SATA Control Mode option with the possibility to enter G-Bios again. smart backup never enabled so far, I can now see two discs in channels 0 and 2, but 1 and 3 are dead.
DVD is still not recognized at all...
Smart Backup Toolbox is not available as described in manual. How do I call it?
Al

**Lsdmeasap** · #5 (**permalink**) 07-10-2008, 02:36 AM

Wish I could help, I will email Janus for you and ask if he/she can come help you

albarth · #6 (**permalink**) 07-10-2008, 02:40 AM

ok last findings for today...
it seems that I can use either RAID mode with channels 0 and 2 used (1 and 2 are dead) or I use smart backup with channels 0 and 1 (2 and 3 are dead). Have not tried 4 discs at once.
dvd not working at all...
bye for now

**Lsdmeasap** · #7 (**permalink**) 07-10-2008, 02:42 AM

OK, Wish you luck

I just emailed Janus for you

**GIGABYTE - Janus Yeh** · #8 (**permalink**) 07-10-2008, 09:23 AM

Hi I will do the same test in my platform, please wait.

**GIGABYTE - Janus Yeh** · #9 (**permalink**) 07-10-2008, 12:12 PM

Hi
find the answer, if you not use 2 device
please plug in GS0 or GS2,

this is chip limitation.

**Lsdmeasap** · #10 (**permalink**) 07-10-2008, 12:36 PM

Thanks Janus.

Hey, just for future reference are you a Male or Female? If you don't mind me asking, just ask so I can know to say He = Janus or She + Janus

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)