|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
11-02-2009, 10:10 PM
|
|||
|
|||
Re: GA-EP45-UD3P - Won't boot with 450FSB
__________________
Gigabyte EP45-UD3P 1.0 F10e, E8400@5??x7.5, 2x2GB Corsair Dominator DDR2/1066 - 8500C5D, Sapphire ATI 4870+Accelero S1rev2+Noctua NF-P12-1300 (slow), Samsung Spinpoint F1 HD103UJ, Enermax MODU82+ 425W, Antec P182 case, Samsung Syncmaster 215TW, Windows 7 64bit     
|
|
11-02-2009, 10:22 PM
|
||||
|
||||
|
Re: GA-EP45-UD3P - Won't boot with 450FSB
I found that tRFC set to a tight setting improves memory scores quite a bit.
Tightening the remaining advanced timings resulted in 1 - 2% improvement. Did you try the AUTO timings with performance enhance = Turbo? If yes, was your system stable?
__________________
_/\ /\ /\ /\ guru in training (for life) /\ /\ /\ /\_ _______ ~~ we get too soon old and too late smart ~~ E6550 @ 3.444GHz [7x492MHz] ___________________ GeminII down-draft HS w/dual Scythe S-Flex fans EP45-UD3P [rev: 1.0] ~ Bios: F6 __________________ CoolerMaster CM 690 case (RC-690-KKN1-GP) 2x2GB Mushkin XP2-8500 [996599] @5-5-4-12 [1:1] __ Zalman ZM-MFC2 controller, watt meter & temp probes Evga 7600GT video card _________________________ Asus VH242H monitor [1920x1080] Antec EarthWatts PSU (500w) _____________________Logitech Z5500 Digital 5.1 Speakers WD Caviar Black WD6401AALS 640GB ___________.___ win 2000 pro (sp4) <><><> compromise and do it my way <><>   ++ I'm not always right, but I'm never wrong ++. Loading OPTIMIZED bios defaults is REQUIRED before you tweak your bios settings.
This includes new system setups and immediately after flashing your bios!!!
|
|
11-03-2009, 12:53 AM
|
|||
|
|||
|
Re: GA-EP45-UD3P - Won't boot with 450FSB
I found out I probably need to keep all of them at 4 else Prime95 crashes. I will see about your suggestion and values set by auto. It might be interesting though, cause I seem to be pushing the limits of my CPU/FSB combination - 540x7.5 is stable, 542 crashes rather fast :)
__________________
Gigabyte EP45-UD3P 1.0 F10e, E8400@5??x7.5, 2x2GB Corsair Dominator DDR2/1066 - 8500C5D, Sapphire ATI 4870+Accelero S1rev2+Noctua NF-P12-1300 (slow), Samsung Spinpoint F1 HD103UJ, Enermax MODU82+ 425W, Antec P182 case, Samsung Syncmaster 215TW, Windows 7 64bit
|
|
11-03-2009, 07:04 AM
|
|||
|
|||
|
Re: GA-EP45-UD3P - Won't boot with 450FSB
http://cad-comic.com/comics/20030523.jpg
This comic is 2003.Make sure your getting more for your $ rather than spending $ to get more.
__________________
Gigabyte EP-45 UD3 bios F8 490 fsb/cpu ref 3.43 Ghz Q8200 980mhz4gb GSkill Black PI 6400 mem(22% o/c) cpu 1.34375V bios(1.32max cpuz) mem 2.08V bios(2.05max cpuz) mch 1.38V bios Coolermaster V8 24/7 case cover on temps 2000fsb!: Peak 71*C cpu core0/62*C cpu/40*C sys/41.2*C nb/48*C Gpu/38*C HDD on 14hr prime 95 blend.(ambient oat 25*C 24-26C) 2.00D tRD 9 bandwidth 9G/s Jeantech 500w psu Jeantech R2 case(modified). 2x120mm fan for nb/memory+3x80mm,1x90mm exhaust fans 9600 gt 512ddr3 1TB WD HDD Vista 64 premium sp2! Last edited by kick; 11-03-2009 at 07:18 AM.
|
|
11-05-2009, 02:58 AM
|
|||
|
|||
|
Re: GA-EP45-UD3P - Won't boot with 450FSB
LOL, after trying the timings and then going back to the original template, I am no longer stable yet again :D :D :D That's almost hillarious. Prime failures after 5 or so hours lol.
__________________
Gigabyte EP45-UD3P 1.0 F10e, E8400@5??x7.5, 2x2GB Corsair Dominator DDR2/1066 - 8500C5D, Sapphire ATI 4870+Accelero S1rev2+Noctua NF-P12-1300 (slow), Samsung Spinpoint F1 HD103UJ, Enermax MODU82+ 425W, Antec P182 case, Samsung Syncmaster 215TW, Windows 7 64bit
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
