TweakTown Forums  

Go Back   TweakTown Forums > Official Tech Support and Sponsor Competitions > GIGABYTE
GA-X58-EXTREME - wrong Raid 0?! GA-X58-EXTREME - wrong Raid 0?!
Register FAQ Members List Social Groups Calendar Mark Forums Read

GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time!

Reply
Page 2 of 2 1 2
 
LinkBack Thread Tools Rate Thread Display Modes
  #11 (permalink)  
Old 03-13-2009, 04:34 PM
Lsdmeasap's Avatar
GIGABYTE Forum Mod
  
Join Date: Jan 2008
Posts: 15,528
Default Re: GA-X58-EXTREME - wrong Raid 0?!
Are those in RAID? I assume so, just wondered since you wrote AHCI and IDE also on both of them
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old 03-13-2009, 04:40 PM
Rolfi's Avatar
Junior Member
  
Join Date: Dec 2008
Location: Germany, Ulm
Posts: 18
Send a message via ICQ to Rolfi Send a message via MSN to Rolfi Send a message via Skype™ to Rolfi
Default Re: GA-X58-EXTREME - wrong Raid 0?!
Yeah they are on raid. On the JMicron I only had it on ide in the bios. No I have selected AHCI. Or had it to be AHCI since it is a raid?
__________________
Intel Core i7 920 4x 2.67GHz @ 4GHZ 36/16/8 211x19 @ 1,328 load / HT off / LLC off - Batch 3837A 724
Gigabyte GA-X58-EXTREME Rev 1.0 (Bios F6f)
DDR3 PC1600 6144MB Kit Corsair XMS3 Dominator CL8 @ 1688Mhz 8/8/8/20 T1
2x MSI 280GTX SSOC @ 771/1323/1566
2x Intel X-M25 SSD (Performance Raid)
850W Be Quiet Dark Power Pro
Vista Ultimate 64
Cosmos S - quad radiator - all @ water / idle 28°C / load 59°C
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old 03-13-2009, 05:16 PM
Lsdmeasap's Avatar
GIGABYTE Forum Mod
  
Join Date: Jan 2008
Posts: 15,528
Default Re: GA-X58-EXTREME - wrong Raid 0?!
OK, even more confusing now!

The Gigabyte/J.Micron, or either one really, cannot be on IDE or AHCI at the same time as RAID. The can be on RAID only, or one of the others.

The can ONLY be on these settings for RAID >>>

Integrated Peripherals

RAID On the Intel ICH10R (Blue Ports)
SATA RAID/AHCI Mode (Intel ICH10R Southbridge) ............. RAID
SATA Port0-3 Native Mode ................................... Enabled (or Disabled, both will work)

RAID on the Gigabyte/J.Micron (White Ports)
Onboard SATA/IDE Device (GIGABYTE SATA2 Chip) ............. Enabled
Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip) ........... RAID/IDE << The IDE is only there to show/remind you that your Actual IDE Devices will be in IDE/PATA mode as normal
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #14 (permalink)  
Old 03-13-2009, 05:23 PM
Rolfi's Avatar
Junior Member
  
Join Date: Dec 2008
Location: Germany, Ulm
Posts: 18
Send a message via ICQ to Rolfi Send a message via MSN to Rolfi Send a message via Skype™ to Rolfi
Default Re: GA-X58-EXTREME - wrong Raid 0?!
CONFUSED PARTY

ICH10 Raid is always AHCI
JMICRON is always IDE

????

__________________
Intel Core i7 920 4x 2.67GHz @ 4GHZ 36/16/8 211x19 @ 1,328 load / HT off / LLC off - Batch 3837A 724
Gigabyte GA-X58-EXTREME Rev 1.0 (Bios F6f)
DDR3 PC1600 6144MB Kit Corsair XMS3 Dominator CL8 @ 1688Mhz 8/8/8/20 T1
2x MSI 280GTX SSOC @ 771/1323/1566
2x Intel X-M25 SSD (Performance Raid)
850W Be Quiet Dark Power Pro
Vista Ultimate 64
Cosmos S - quad radiator - all @ water / idle 28°C / load 59°C
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #15 (permalink)  
Old 03-13-2009, 05:58 PM
Lsdmeasap's Avatar
GIGABYTE Forum Mod
  
Join Date: Jan 2008
Posts: 15,528
Default Re: GA-X58-EXTREME - wrong Raid 0?!
Where are you seeing this at anyway? Could just be funky programs picking things up funny?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #16 (permalink)  
Old 03-13-2009, 06:04 PM
Rolfi's Avatar
Junior Member
  
Join Date: Dec 2008
Location: Germany, Ulm
Posts: 18
Send a message via ICQ to Rolfi Send a message via MSN to Rolfi Send a message via Skype™ to Rolfi
Default Re: GA-X58-EXTREME - wrong Raid 0?!
No that was a question ;-) but me was told that @ ich10 I can switch between ide and ahci when i install vista with ahci... i will test it in the afternoon.
__________________
Intel Core i7 920 4x 2.67GHz @ 4GHZ 36/16/8 211x19 @ 1,328 load / HT off / LLC off - Batch 3837A 724
Gigabyte GA-X58-EXTREME Rev 1.0 (Bios F6f)
DDR3 PC1600 6144MB Kit Corsair XMS3 Dominator CL8 @ 1688Mhz 8/8/8/20 T1
2x MSI 280GTX SSOC @ 771/1323/1566
2x Intel X-M25 SSD (Performance Raid)
850W Be Quiet Dark Power Pro
Vista Ultimate 64
Cosmos S - quad radiator - all @ water / idle 28°C / load 59°C
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #17 (permalink)  
Old 03-13-2009, 06:21 PM
Lsdmeasap's Avatar
GIGABYTE Forum Mod
  
Join Date: Jan 2008
Posts: 15,528
Default Re: GA-X58-EXTREME - wrong Raid 0?!
ICH10R can do RAID or AHCI or IDE

J.Micron can do RAID or AHCI or IDE as well

You can switch from IDE to AHCI and AHCI to IDE yes on ICH10R, but NOT TO RAID.

NO switching from RAID to anything, or anything to RAID without a Clean install.

And you cannot switch a AHCI or RAID from the ICH10R to the J.Micron Ports either, or the other way around.

You can Move an IDE install to and from either though
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #18 (permalink)  
Old 03-13-2009, 06:31 PM
Rolfi's Avatar
Junior Member
  
Join Date: Dec 2008
Location: Germany, Ulm
Posts: 18
Send a message via ICQ to Rolfi Send a message via MSN to Rolfi Send a message via Skype™ to Rolfi
Default Re: GA-X58-EXTREME - wrong Raid 0?!
Oh that was the post i have waited for ;-) - thanks!
__________________
Intel Core i7 920 4x 2.67GHz @ 4GHZ 36/16/8 211x19 @ 1,328 load / HT off / LLC off - Batch 3837A 724
Gigabyte GA-X58-EXTREME Rev 1.0 (Bios F6f)
DDR3 PC1600 6144MB Kit Corsair XMS3 Dominator CL8 @ 1688Mhz 8/8/8/20 T1
2x MSI 280GTX SSOC @ 771/1323/1566
2x Intel X-M25 SSD (Performance Raid)
850W Be Quiet Dark Power Pro
Vista Ultimate 64
Cosmos S - quad radiator - all @ water / idle 28°C / load 59°C
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #19 (permalink)  
Old 03-13-2009, 06:58 PM
NimrodAUS's Avatar
Senior Member
  
Join Date: Dec 2008
Location: Australia
Posts: 1,130
Send a message via MSN to NimrodAUS
Default Re: GA-X58-EXTREME - wrong Raid 0?!
Quote:
Originally Posted by Lsdmeasap View Post
^^ Right ^^^

Intel ICH10R controller is suggested for best Performance (Blue on X58)*

*Note to NimrodAUS
Noted. I was just going off the picture. I have yet to experience the glory of X58 So thanks for the heads up.
__________________
Lian Li PC-7F Chassis Black
Gigabyte GA-X48-DS5 MB (Rev. 1.1 BIOS v.F8c)
Gigabyte ODIN GT 800Watt PSU
Intel Core2Quad Q9550 E0 @ 3.4Ghz @ 1.25vcore
Noctua NH-U12P + AS5
G.Skill 2X2GB F2-8500CL5D-4GBPK
2 X ATI Radeon HD4850 512MB (Crossfired)
Dell Ultrasharp 2209WA IPS
2 X 1TB Seagate 7200.11 in RAID 1
Pioneer DVR216 SATA DVD MultiDrive
Windows 7 Ultimate X64 RC1 (Build 7232)
------------------------------------------------
Gigabyte Poseidon Chassis
Gigabyte GA-EP45-DS3 (Rev. 1.0 BIOS v.F9)
ASUS Artic Square CPU Cooling with AS5
Thermaltake TR2 RX 550Watt PSU
Intel Core2Duo E8500 E0 @ 3.8Ghz @ 1.25vcore
Corsair 2 X 2Gb XMS2 PC6400C5 DDR2
NVIDIA GeForce 8800GT 512MB
1 X Seagate 1TB 7200.12 + Seagate 750GB 7211.11
Sony SATA DVD MultiDrive
Windows 7 Ultimate X64 RC1 (Build 7232)
------------------------------------------------
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #20 (permalink)  
Old 03-13-2009, 08:28 PM
Lsdmeasap's Avatar
GIGABYTE Forum Mod
  
Join Date: Jan 2008
Posts: 15,528
Default Re: GA-X58-EXTREME - wrong Raid 0?!
Quote:
Originally Posted by Rolfi View Post
Oh that was the post i have waited for ;-) - thanks!
Ahh, so easy wasn't it

Sorry, I could have said that before, I guess I just did not know you needed to know all the possibilities

Quote:
Originally Posted by NimrodAUS View Post
Noted. I was just going off the picture. I have yet to experience the glory of X58 So thanks for the heads up.

Nice I was hoping you noticed this post just so you knew which was which in X58. Finally got some nice colors I think

Carry on with your efforts here man, they are appreciated!!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply
Page 2 of 2 1 2

Bookmarks

Tags
extreme, performance, raid, raid 0, setup

« GA-EX38-DS4 continuous reboot after 9 months of stablity | EP45-UD3 +1066 memory? »

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT +8. The time now is 09:57 PM.

TweakTown - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.2
Copyright (c) Tweak Town Pty Ltd