|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools | Rate Thread | Display Modes |
08-12-2009, 04:37 PM
|
||||
|
||||
Gigabyte BIOS Templates (To Give Us Your Settings)
BIOS Templates X58 & P55/P57 X58 This is Just a template We use to ask people their settings, pay no attention to the numbers in it, replace with yours 0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi 0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough) 0X00000101 << Not enough Vcore Voltage CPU = Model # Motherboard = Model, Revision # BIOS Version = Ram = Brand, Model#, Part#, And or Link Code:
Advanced CPU Features: CPU Clock Ratio ................................ [20x] Intel(R) Turbo Boost Tech .................. [Enabled] CPU Cores Enabled ............................ [All] CPU Multi Threading .......................... [Enabled] CPU Enhanced Halt (C1E) ................... [Disabled] C3/C6/C7 State Support .................... [Disabled] CPU Thermal Monitor ......................... [Enabled] CPU EIST Function ............................ [Disabled] Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs Bi-Directional PROCHOT ..................... [Enabled] Uncore & QPI Features: QPI Link Speed .............................. x36 Uncore Frequency .......................... (Always 2x memory Multi or 2x +1) Isonchronous Frequency ..................[Enabled] Standard Clock Control: Base Clock (BCLK) Control ................ [Enabled] BCLK Frequency (MHz) ..................... PCI Express Frequency (MHz) ........... [100] C.I.A.2 [Disabled] Advanced Clock Control: CPU Clock Drive ..............................[800mV] PCI Express Clock Drive ................... [900mV] CPU Clock Skew ............................. [0ps] IOH Clock Skew ............................. [0ps] Advanced DRAM Features: Performance Enhance ...................... [Standard] Extreme Memory Profile (X.M.P) ......... [Disabled] System Memory Multiplier (SPD) ........ [AUTO] DRAM Timing Selectable (SPD) .......... [Manual] Channel A + B + C Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ...................... tRCD ....................................... tRP ......................................... tRAS ....................................... Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread ##Channel A Advanced Timing Control## tRC ........................................ (Should be = tRAS + tRP or above for stability) tRRD ....................................... tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4) tWR ........................................ tWTP ....................................... (tWTP Must = tWR + tWL + 4) tWL ........................................ (tWL Must be CAS Latency -1) tRFC ....................................... tRTP ....................................... tFAW ...................................... Command Rate (CMD) ................ ##Channel A Misc Timing Control## Round Trip Latency ................... Advanced Voltage Control: CPU Load Line Calibration ................. [Disabled] CPU Vcore ............................... QPI/VTT Voltage 1.150v ............ CPU PLL 1.800v ....................... MCH/ICH PCIE 1.500v ........................... QPI PLL 1.100v ....................... IOH Core 1.100v ..................... ICH I/O 1.500v ....................... ICH Core 1.1v ........................ DRAM DRAM Voltage 1.500v .............. DRAM Termination 0.750v [AUTO] Ch-A Data VRef. 0.750v [AUTO] Ch-B Data VRef. 0.750v [AUTO] Ch-C Data VRef. 0.750v [AUTO] Ch-A Address VRef. 0.750v [AUTO] Ch-B Address VRef. 0.750v [AUTO] Ch-C Address VRef. 0.750v [AUTO] XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread P55/P57 Code:
Advanced Frequency Settings: CPU Clock Ratio 21x Advanced Core Features [Press Enter]: Intel(R) Turbo Boost Tech................[Disabled] CPU Cores Enabled........................[All] CPU Multi-Threading......................[Disabled] CPU Enhanced Halt (C1E)..................[Auto] C3/C6/C7 State Support...................[Auto] CPU Thermal Monitor......................[Auto] CPU EIST Function........................[Auto] Bi-Directional PROCHOT...................[Auto] QPI Clock Ratio..........................[Auto] QPI Link Speed........................[x] Uncore Clock Ratio....................[18x] Uncore Frequency.........................3600MHz >>>>> Standard Clock Control <<<<< Base Clock (BCLK) Control................[Enabled] BCLK Frequency ..........................[200] Extreme Memory Profile (X.M.P.)..........[Disabled] System Memory Multiplier (SPD)...........[Disabled] Memory Frequency (MHz)................2000 PCI Express Frequency (MHz)..............[Auto] C.I.A.2..................................[Disabled] >>>>> Advanced Clock Control <<<<< CPU Clock Drive..........................[ 800mV] PCI Express Clock Drive..................[ 900mV] CPU Clock Skew...........................[ 0ps] Advanced Memory Settings: Extreme Memory Profile (X.M.P.)..........[Disabled] System Memory Multiplier (SPD)...........[10.0] Memory Frequency (MHz)................2000 Performance Enhance (SPD)............. [Turbo] DRAM Timing Selectable (SPD)............ [Expert] Profile DDR Voltage .................. Profile QPI Voltage .................. Channel Interleaving.....................[Auto] Rank Interleaving........................[Auto] >>>>> Channel A & B Channel A Timing Settings [Press Enter]: Cas Latency Time........................[8] tRCD....................................[8] tRP.....................................[9] tRAS...................................[24] >>>>> Advanced Timing Control tRC....................................[Auto] tRRD...................................[Auto] tWTR...................................[Auto] tWR....................................[Auto] tWTP...................................[Auto] tWL....................................[Auto] tRFC...................................[Auto] tRTP...................................[Auto] tFAW...................................[Auto] Command Rate (CMD).................. 1 [1] >>>>> Misc Timing Control B2B Cas Delay..........................[Auto] Round Trip Latency.....................[Auto] Channel A Turnaround Settings [Press Enter]: Different DIMMs........................[Auto] Different DIMMs........................[Auto] On The Same Rank.......................[Auto] >>>>> Channel A Writes Followed By Writes Different DIMMs........................[Auto] Different DIMMs........................[Auto] On The Same Rank.......................[Auto] Advanced Voltage Settings: ******Mother Board Voltage Control ****** Voltage Types............Normal......Current -------------------------------------------- >>> CPU Load Line Calibration...................[Level 2] CPU Vcore..................1.19375v..[1.xv] QPI/VTT Voltage..........1.100v.....[1.x00v] >>> MCH/ICH PCH Core....................1.050v.....[Auto] CPU PLL......................1.800v.....[Auto] >>> DRAM DRAM Voltage..............1.500v.....[1.660v] DRAM Termination.........0.750v.....[Auto] Ch-A Data VRef............0.750v.....[Auto] Ch-A Data VRef............0.750v.....[Auto] Ch-B Data VRef............0.750v.....[Auto] Ch-B Data VRef............0.750v.....[Auto] Miscellaneous Settings:[/SIZE] Isochronous Support....................[Enabled] Virtualisation technology..............[Enabled] USB Storage Detect ....................[Disabled]
__________________
Last edited by Lsdmeasap; 10-28-2009 at 04:08 PM. Reason: Added info/link for a few timing rules and info for X58 + Added P55     |
|
08-12-2009, 04:37 PM
|
||||
|
||||
|
P45/P43 (Also includes G45/G43 Variants) FULL Template W/ Some Suggested settings and or tips. This is Just a template We use to ask people their settings, pay no attention to the numbers in it, replace with yours CPU = Model # Motherboard = Model, Revision # BIOS Version = Ram = Brand, Model#, Part#, And or Link Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto or Fast CPU Clock Ratio ..........................: Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................: Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: Mhz PCI Express Frequency (Mhz) .........:Set to 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: <<< 800 PCI Express Clock Drive.................: <<< 900 CPU Clock Skew (ps)....................: <<< MCH Clock Skew (ps)...................: <<< DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: Memory Frequency (Mhz) ..............: DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ tRCD ......................................... tRP'........................................... tRAS.......................................... Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go Advanced Timing Control tRRD........................................... tWTR.......................................... tWR............................................ tRFC........................................... tRTP........................................... Command Rate (CMD) ....................:2 Driving Strength Profiles Driving Strength ............................ Channel A Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control CPU CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly MCH/ICH MCH Core…………….....1.100V...........: << MCH Reference….…….0.760V...........; <<< Leave MCH/DRAM Ref.…......0.900V...........: <<< Leave ICH I/O……………….....1.500V............: <<< Leave ICH Core…………...……1.100V............: <<< Leave DRAM DRAM Voltage ……....1.800V............: DRAM Termination .…0.900V............: <<< Leave Channel A Reference 0.900V............: <<< Leave Channel B Reference 0.900V............: <<< Leave Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC Integrated Peripherals Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
__________________
Last edited by Lsdmeasap; 09-16-2009 at 10:53 PM. |
|
08-12-2009, 04:45 PM
|
||||
|
||||
|
P45/P43 (Also includes G45/G43 Variants) Simplified Template For users who may not be sure of anything in the MIT Section Motherboard: Model: Rev#: Bios Version: Cpu: Model Ram: Brand, Model/Part#, Link to your ram's specs Power Supply Unit: Brand, Model#, Wattage note: replace all ?? with the value displayed in your bios. ----> Replace "Auto" with manually set values. MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster -------------- : [Auto] CPU Clock Ratio ---------------------- : [??] Fine CPU Clock Ratio ----------------- : [0.0] <-- ignore if not available CPU Frequency ---------------------: #### <-- this is set by your bios Clock Chip Control Standard Clock Control CPU Host Clock Control --------------- : [Enabled] CPU Host Frequency (Mhz) --------------: [???] PCI Express Frequency (Mhz) ---------- : [Auto] <--- Set to 100, never leave this on Auto C.I.A.2 ------------------------------ : [Disabled] Advanced Clock Control ------- [Press Enter] CPU Clock Drive ---------------------- : [???] PCI Express Clock Drive -------------- : [???] CPU Clock Skew (ps) ------------------ : [???] MCH Clock Skew (ps) ------------------ : [???] DRAM Performance Control Performance Enhance ------------------- : [Turbo] <--- set to STANDARD when overclocking Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled (G)MCH Frequency Latch ---------------- : [Auto] System Memory Multiplier -------------- : [Auto] <-- this is the setting that you are using Memory Frequency (Mhz) ---------------- : [Auto] DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking Standard Timing Control CAS Latency Time -------- ?? ---------- : [Auto] tRCD ------------------- ?? ---------- : [Auto] tRP --------------------- ?? ---------- : [Auto] tRAS ------------------- ?? ---------- : [Auto] Advanced Timing Control tRRD ------------------- ?? ---------- : [Auto] tWTR ------------------- ?? ---------- : [Auto] tWR --------------------- ?? ---------- : [Auto] tRFC ------------------- ?? ---------- : [Auto] tRTP ------------------- ?? ---------- : [Auto] Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK Driving Strength Profiles Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking Channel A Static tRead Value --------------------- : [Auto] tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO tRD Phase1 Adjustment ------------------ : [Auto] tRD Phase2 Adjustment ------------------ : [Auto] tRD Phase3 Adjustment ------------------ : [Auto] Trd2rd(Different Rank) ----------------- : [Auto] Twr2wr(Different Rank) ----------------- : [Auto] Twr2rd(Different Rank) ----------------- : [Auto] Trd2wr(Same/Diff Rank) ----------------- : [Auto] Dimm1 Clock Skew Control --------------- : [Auto] ps Dimm2 Clock Skew Control --------------- : [Auto] ps Channel B Static tRead Value --------------------- : [Auto] tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO tRD Phase1 Adjustment ------------------ : [Auto] tRD Phase2 Adjustment ------------------ : [Auto] tRD Phase3 Adjustment ------------------ : [Auto] Trd2rd(Different Rank) ----------------- : [Auto] Twr2wr(Different Rank) ----------------- : [Auto] Twr2rd(Different Rank) ----------------- : [Auto] Trd2wr(Same/Diff Rank) ----------------- : [Auto] Dimm1 Clock Skew Control --------------- : [Auto] ps Dimm2 Clock Skew Control --------------- : [Auto] ps Motherboard Voltage Control CPU Voltage Types------------ Normal -------- Current ----- Load-Line Calibration ----------------- : [Disabled] CPU Vcore --------------- ?.????? ---- : [Auto] CPU Termination --------- ?.???V* ----- : [Auto] CPU PLL ----------------- ?.???V* ----- : [Auto] CPU Reference ----------- ?.???V* ----- : [Auto] CPU Reference2 ---------- ?.???V* ----- : [Auto] MCH/ICH MCH Core ---------------- ?.???V ------- : [Auto] MCH Reference ----------- ?.???V ------- : [Auto] MCH/DRAM Ref ------------ ?.???V ------ : [Auto] ICH I/O ----------------- ?.???V ------- : [Auto] ICH Core ---------------- ?.???V ------- : [Auto] DRAM DRAM Voltage ------------ ?.???V ------- : [Auto] DRAM Termination -------- ?.???V ------- : [Auto] Channel A Reference ----- ?.???V ------- : [Auto] Channel B Reference ----- ?.???V ------- : [Auto] Advanced Settings Limit CPUID Max. to 3 ------------------ : [Disabled] No-Execute Memory Protect -------------- : [Enabled] CPU Enhanced Halt (C1E) ---------------- : [Disabled] C2/C2E State Support ------------------- : [Disabled] x C4/C4E State Support ----------------- : [Disabled] CPU Thermal Monitor 2 (TM2) ------------ : [Enabled] CPU EIST Function --------------------- : [Disabled] Virtualization Technology -------------- : [Disabled] Integrated Peripherals Legacy USB Storage Detect ------------- : [Disabled]
__________________
Last edited by Lsdmeasap; 08-12-2009 at 06:19 PM. |
|
08-12-2009, 06:18 PM
|
||||
|
||||
|
Re: Gigabyte BIOS Templates (To Give Us Your Settings)
P35 & X38/X48 (Also includes P31/G31/965P Variants) This is Just a template We use to ask people their settings, pay no attention to the numbers in it, replace with yours CPU = Model # Motherboard = Model, Revision # BIOS Version = Ram = Brand, Model#, Part#, And or Link Code:
Robust Graphics Booster___________ [Auto] CPU Clock Ratio ____________ [8] Fine Clock Ratio ____________[0.5] CPU Host Clock Control_ [Enabled] CPU Host Frequency (MHz)__________ [450] PCI Express Frequency (Mhz)_______ [100] C.I.A. 2__________________________ [Disabled] System Memory Multiplier (SPD)____ [2.00] DRAM Timing Selectable_______ SPD __ [Manual] Performance Enhance = [Standard] CAS Latency Time________________ Dram RAS# to CAS# Delay_________ Dram RAS# Precharge Delay_______ Precharge Delay (tRAS)__________ ACT to ACT Delay (tRRD)_________ Rank Write to READ Delay________ Write to Precharge Delay_________ Refresh to ACT Delay______________ Read to Precharge Delay__________ Static tRead Value_______________ Static tRead Phase Adjust________ [Auto] CPU/PCIEX Clock Driving Control [800mV] CPU Clock Skew Control [normal] GMCH Clock Skew Control [Normal] System Voltage Control____ [Manual] DDR2 OverVoltage Control__ [+0.300V] PCI-E OverVoltage Control_ [+0.1V] FSB OverVoltage Control___ [+0.1V] (G)MCH OverVoltage Control [+0.1V] CPU Voltage Control_______ [1.25] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC Integrated Peripherals Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
__________________
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 10 (2 members and 8 guests) | |
| legala, The_Omni |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
