Gigabyte Latest BIOS

[artdrivers]

Vista does not need drivers AHCI drivers install Vista without AHCI drivers. Vista will detect and load it's own drivers.

[Booster]

Hi, I updated my ex58-ud4p bios from F8 to F9b (had problems with F9a and tweaking advanced memory timings) and everything is running fine, but I did notice I lost a bunch of multipliers, uncore has a max of 16x, memory with a max of 8x, and QPI only has 36x.

While I don't need the higher multi's, I'm just wondering if anyone saw this change too?

[kamikaze24]

Come back F9b => F9a , o/c is impossible, reboot, before with F9a no matters (1h of occt), games ...

[aquax]

Originally Posted by Booster

Hi, I updated my ex58-ud4p bios from F8 to F9b (had problems with F9a and tweaking advanced memory timings) and everything is running fine, but I did notice I lost a bunch of multipliers, uncore has a max of 16x, memory with a max of 8x, and QPI only has 36x.

While I don't need the higher multi's, I'm just wondering if anyone saw this change too?

No, doesn't have this change, make sure you load optimized default settings before you upgrade your bios and load optimized default settings after the flash

[Booster]

Have an itch to OC some more, to see 4.4 or 4.6 but it won't post at all if I try a 6x memory divider and a 12x or 13x uncore with F9b. Back to F8, but I will miss the updated AHCI and RAID rom.

Originally Posted by aquax

No, doesn't have this change, make sure you load optimized default settings before you upgrade your bios and load optimized default settings after the flash

Hm, maybe I should've done that rather than loading my "default" before flashing. I'll give it another try later and flash back to F9b and also see if the memory divider and uncore problem still happens.

[aquax]

Originally Posted by Booster

Yeah, it won't post at all if I try a 6x memory divider and a 12x or 13x uncore with F9b. Back to F8, but I will miss the updated AHCI and RAID rom.

give a try to F8a, it have the S3 issue fixed. with bios F8 S3 is broken

[aquax]

Well, with the F9b I can now boot with 202BCLK+ without problem, with OLD bios I can never boot over 199BCLK. But I can't make the system stable with 200BCLK+ I think something need a huge voltage increase but I don't know which setting, it gives me BSOD 50, 1E, 1D, A with BCLK 202x21 .... what do you think Mr. LSD?

[iktus]

Originally Posted by aquax

Well, with the F9b I can now boot with 202BCLK+ without problem, with OLD bios I can never boot over 199BCLK. But I can't make the system stable with 200BCLK+ I think something need a huge voltage increase but I don't know which setting, it gives me BSOD 50, 1E, 1D, A with BCLK 202x21 .... what do you think Mr. LSD?

Same as mine, whit F8f now i can run stress test, but the system are not stable whit various bsod : 3b 1e etc
qpi problem(0x00000124) was defeated
i hope the new bios
tnx
Ps now the cpu need 2 steps in more than vcore

[hank123]

how bout a beta for a ep45t-ud3p please. ram over clocking on this mobo sucks

[angelreaper]

Originally Posted by iktus

Same as mine, whit F8f now i can run stress test, but the system are not stable whit various bsod : 3b 1e etc
qpi problem(0x00000124) was defeated
i hope the new bios
tnx
Ps now the cpu need 2 steps in more than vcore

F8f good for my