|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
07-09-2009, 09:52 PM
|
||||
|
||||
Re: Gigabyte Latest BIOS
On page one of this thread a BIOS version F10b is listed as the latest for my EP45-UD3P mobo. The latest version showing on the GB website is F9. Where is the version F10b coming from?
__________________
Best regards, FlyingHorse GA-EP45-UD3P Q9650 450x9@2.40B BIOS: F10f
G.Skill F2-8800CL5Q-8GBPI (4x2GB) DDR2-1100 EVGA 285GTX SSC Graphics HighPoint 2640x4 4-Port SAS RAID Controller Creative X-Fi ExtremeGamer Audio 1 WD 640GB Caviar Black 2 WD 150GB Raptors RAID 0 2 WD 1TB Caviars + 1 WD 750GB Caviar 2 WD 1TB Caviars in Icy Dock Mobile Racks 2 WD 640GB Caviars in Icy Dock Mobile Racks 2 WD 500GB Caviars in Icy Dock Mobile Racks 1 Segate 160GB eSATA 2.5" 1 LG GH22NS30 SATA DVD Burner Silverstone SST-ST75ZF 750W PSU Cooler Master ATCS 840 Full Tower Windows 7 Ultimate x64 / Windows Vista Ultimate x64 SP2 / openSUSE 11.1 x86-64     
|
|
07-10-2009, 04:46 AM
|
|||
|
|||
|
Re: Gigabyte Latest BIOS
It's beta.
__________________
Gigabyte EP45-UD3P 1.0 F10e, E8400@5??x7.5, 2x2GB Corsair Dominator DDR2/1066 - 8500C5D, Sapphire ATI 4870+Accelero S1rev2+Noctua NF-P12-1300 (slow), Samsung Spinpoint F1 HD103UJ, Enermax MODU82+ 425W, Antec P182 case, Samsung Syncmaster 215TW, Windows 7 64bit
|
|
07-10-2009, 07:40 AM
|
||||
|
||||
|
Re: Gigabyte Latest BIOS
@Octopuss
Thanks for the info.
__________________
Best regards, FlyingHorse GA-EP45-UD3P Q9650 450x9@2.40B BIOS: F10f
G.Skill F2-8800CL5Q-8GBPI (4x2GB) DDR2-1100 EVGA 285GTX SSC Graphics HighPoint 2640x4 4-Port SAS RAID Controller Creative X-Fi ExtremeGamer Audio 1 WD 640GB Caviar Black 2 WD 150GB Raptors RAID 0 2 WD 1TB Caviars + 1 WD 750GB Caviar 2 WD 1TB Caviars in Icy Dock Mobile Racks 2 WD 640GB Caviars in Icy Dock Mobile Racks 2 WD 500GB Caviars in Icy Dock Mobile Racks 1 Segate 160GB eSATA 2.5" 1 LG GH22NS30 SATA DVD Burner Silverstone SST-ST75ZF 750W PSU Cooler Master ATCS 840 Full Tower Windows 7 Ultimate x64 / Windows Vista Ultimate x64 SP2 / openSUSE 11.1 x86-64
|
|
07-10-2009, 06:49 PM
|
|||
|
|||
|
Incorrect (low) CPU temp reportede with F8e (ex-58-ud5)
Hi, I've just switched to the F8e bios -- fantastic to have resume from S3 sleep working as well as the automatic CPU fan speed -- so thanks!
Two bugs, one I haven't found a work around for. First, after resume the memory timings are set to 4 - 8 - 7 - 20 instead of (the correct) 7 - 8 - 7 - 20. By getting rid of all "auto" settings in the BIOS this no longer causes the syustem to be unstable after S3, although the CAS latency is still *reported* incorrectly as 4. The second bug is that the CPU temp is reported as ridiculously low (right now it's reported as 17, when in fact it's 23 ambient). This means that the CPU fan is spinning way too slow (300rpm). Is there a work around or do I need to wait until the next beta? Also, can anyone say when the expect the official F8 bios to be released? I've build this machine for a friend and I'd like to hand it over on the next official release if this isn't going to much longer in the works. Thanks again for all your excellent work here! Cheers Simon
|
|
07-10-2009, 08:21 PM
|
||||
|
||||
|
Re: Gigabyte Latest BIOS
For ex58-ud4p bios f9b I found that when coming out of s3 sleep no matter what software being used the temps for the motherboard, outer cpu and northbridge cannot be detected until a reboot is done. If these are not working there might not be any heat warning or automatic shutdown due to overheat of the system if the sensors are not working properly after s3 sleep. Haven't tried f9c but this wasn't on the change log I saw so it might need to be addressed.
__________________
Gigabyte GA-EX58-UD4P F10d Intel i7 920 D0 3.8Ghz 181x21 1.24375Vcore 1.195QPI/Vtt Noctua NH-U12P SE1366 push-pull, vertically mounted 3x2GB G.Skill DD3 1600 F3-12800CL9T-6GBNQ 8-8-8-21-1T 1.54v 2x EVGA GeForce GTX 260 Core 216 SLI 700-1500-1200 CORSAIR CMPSU-850TX 850W PSU 2x WD Caviar Black 640GB in Raid 0, 64KB stripes, 250GB short stroke WD Caviar Black 1TB Antec 1200 Gamer Case Windows 7 Ultimate x64
|
|
07-10-2009, 11:11 PM
|
|||
|
|||
|
Re: Gigabyte Latest BIOS
the pci-e limitation isn't a bios one, it requires a board hardware modification
__________________
i7 920, Gigabyte EX58-UD5 (F9h Ex BIOS), 3x2GB Corsair PC3-12800, Asus EAH4870X2TOP
|
|
07-10-2009, 11:41 PM
|
|||
|
|||
|
Re: Gigabyte Latest BIOS
lighten up
__________________
Gigabyte EP45-UD3P 1.0 F10e, E8400@5??x7.5, 2x2GB Corsair Dominator DDR2/1066 - 8500C5D, Sapphire ATI 4870+Accelero S1rev2+Noctua NF-P12-1300 (slow), Samsung Spinpoint F1 HD103UJ, Enermax MODU82+ 425W, Antec P182 case, Samsung Syncmaster 215TW, Windows 7 64bit Last edited by casecutter; 07-11-2009 at 11:51 AM.
|
|
07-11-2009, 12:35 AM
|
|||
|
|||
|
Re: Gigabyte Latest BIOS
you asked why you couldn't raise pci-e freq over 103 and i told you the reason
__________________
i7 920, Gigabyte EX58-UD5 (F9h Ex BIOS), 3x2GB Corsair PC3-12800, Asus EAH4870X2TOP
Last edited by casecutter; 07-11-2009 at 11:54 AM.
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 370 (30 members and 340 guests) | |
| barrney, blacktiger, bossque, BZwart, clo007, crazyjak, cristi18r, DDay149, DougQuaid, ekoostik, EQUANT, ferjim, gashalot, jbloggs, jcarno, Judge-dredd, JumpyJim, Khaled Imam, Klaus_1250, legala, luckman212, MBIL, MisterIO, net1, nicolasrosa, PalZer0, Roydhudson, sfoneloki, SloPoke, tonus |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
