|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
09-30-2009, 04:20 AM
|
|||
|
|||
Help! overclock on EP43 DS3L + q9400 + G.Skill 1066...
So, I wonder what are the optimal settings for a good overclock on my system. GIGABYTE EP43 DSL3, Q9400, 2x 2GB G. SKILL 1066, SATELLITE 600W Tentet overclock, but it did not work, after I turn the computer off and connected it again, and usually carrying the windows, but do not know what may have happened. (400x8=3200 - 1.25v - 2.66D 1066 - 5-5-5-15... = fail =\ ) Can anyone help me?     
|
|
09-30-2009, 04:30 AM
|
|||
|
|||
Re: Help! overclock on EP43 DS3L + q9400 + G.Skill 1066...
There are two that OCing the Q9400 in GA-EP45-UD3R/UD3 Overclocking for first time
Different board but same basic rules applied, you may want to have a look.
__________________
GA-EP43-UD3L Rev#: 1.0 - F5 Intel Core 2 Duo E7200 (M0/SLAPC/VID 1.063) 2.53GHz @ 400x9.5 3.8GHz 1.264v 79c full load stable Scythe Mugen 2 @ 2680rpm 93CFM Corsair PC2-6400 TWIN2X2048-6400C4 @ DDR-800 4-4-4-12 tRD 7 Sapphire Radeon HD 4770 512MB GDDR5 FSP Blue Storm II 500, 500W Compucase 6C60 Dell 2408WFP @ 1920x1200 
|
|
09-30-2009, 03:32 PM
|
||||
|
||||
|
Re: Help! overclock on EP43 DS3L + q9400 + G.Skill 1066...
Your EP43-DS3L is good for moderate overclocks.
You will probably find that Cpu Host Frequency will be limited to about 420MHz maximum. Check out this post for basic bios settings and follow the steps that explain how to provide the information we need. Are you familiar with stress testing your bios settings using Prime95 or OCCT. Let us know if you need more help.
__________________
_/\ /\ /\ /\ guru in training (for life) /\ /\ /\ /\_ _______ ~~ we get too soon old and too late smart ~~ E6550 @ 3.444GHz [7x492MHz] ___________________ GeminII down-draft HS w/dual Scythe S-Flex fans EP45-UD3P [rev: 1.0] ~ Bios: F6 __________________ CoolerMaster CM 690 case (RC-690-KKN1-GP) 2x2GB Mushkin XP2-8500 [996599] @5-5-4-12 [1:1] __ Zalman ZM-MFC2 controller, watt meter & temp probes Evga 7600GT video card _________________________ Asus VH242H monitor [1920x1080] Antec EarthWatts PSU (500w) _____________________Logitech Z5500 Digital 5.1 Speakers WD Caviar Black WD6401AALS 640GB ___________.___ win 2000 pro (sp4) <><><> compromise and do it my way <><>   ++ I'm not always right, but I'm never wrong ++. Loading OPTIMIZED bios defaults is REQUIRED before you tweak your bios settings.
This includes new system setups and immediately after flashing your bios!!!
|
|
| Bookmarks |
| Tags |
| ep43, gigabyte, q9400 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
