POST i7 CORE TEMPS HERE!!!

[dbee]

HEY All! just thought i'd start a thread to see what kind of temps everyone is getting on there i7 920's.
1 Please list if your a C0 or D0 stepping chip,
2. what voltages your vcore and qpi are set to,
3. and what type of CPU cooler you are using.
If you'd like , also list how ur temps scale from stock to your highest overclock. Any additional details are awesome!

I thought this would be great to see how everyones machines are doing these days compared to others similar machines. THANKS MUCH ALL !

ILL START....

[dbee]

ALSO... forgot to mention of course we would need to know what speed your running at

1. i7 920 C0 stepping
2. 1.35 vcore 1.30 qpi @ 3.78ghz 38 idle 75 degrees full load prime 95 hour still tweakin
3. noctua nh-u12p se1366

i can take my i7 to 3.5 using only 1.2vcore and 1.1 qpi idle at 32 and full load at 59
have not tested anything higher than the 3.78 ...yet...

ps. screens would work nicely, ill post some of mine tonite! hope to see some replies and not a dead thread!

[pulsenz]

Gigabyte EX58-UD3R with Thermolab BARAM cooler
i7 920 @ 4.0Ghz, full load at ~52degC

[dbee]

HOW! im jealous.... no really how bout some more details pulsenz, i would really like to know what my problem is! Thanks much- dbee

[dbee]

oops i guess i posted in the wrong forum category... o well.

[pulsenz]

All I did was use this guide: http://images.tweaktown.com/imageban...2.12_(ENG).pdf

[MadMax2911]

Originally Posted by dbee

oops i guess i posted in the wrong forum category... o well.

All you have to do is look down at the quote button and there is a edit button for you to change what you have written and you can even put pictures in there too (you may have to click on the advanced button of course).
If you guys have a UD3R, LR, P or L board feel free to post the drivers you are using on one of my new threads located here Need input Gigabyte Drivers EP45 UD3LR or if you could pass the word on that would help too. I may do another thread on the DS3R series boards too.
Max out

[i7 920]

i7 920 D0 @3.8 GHz 1.28v
Qpi 1.28
GA-EX58-UD5
idle 45-50 load 60+ not game to load it right up for long
Cooler Xigmatek dark night.

Fitting a IFX-14 over the weekend

[Grnkjr0]

Originally Posted by pulsenz

Gigabyte EX58-UD3R with Thermolab BARAM cooler
i7 920 @ 4.0Ghz, full load at ~52degC

If that is using prime95 or a similar program, I would like to see a picture of that with Everest Ultima showing the temperature and task manager showing 100% load and CPU-Z showing the CPU.

Even with a D0 stepping and on water - I think running 52 C at 100% load, would be difficult.

Poul

[dbee]

hey there poul, always a pleasure to see ya. i lowered my vcore back to 1.275 and my blck to 165 to get 3.465, where i was before getting temps around 65. Yea that 52 at 4.0 does seem rather , too impressive... screens would wow me .