|
|
|||||||
| GIGABYTE GIGABYTE needs no introduction but they are here to provide free technical support for their motherboards, graphics cards and other products! Competitions will also be ran from time to time! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
10-30-2008, 06:25 PM
|
||||
|
||||
Re: Problems with GA-EP43-DS3L and 2x2GB memory
If you want settings let me know and post what I asked, if not please do read the memory guide and good luck in tweaking your ram
__________________
    
|
|
10-31-2008, 02:51 AM
|
|||
|
|||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
I think this is a problem with this specific OCZ memory and Gigabyte boards. Don't ask me why, but I am having the same problem getting the PC2-8500 Platinum memory to work on my EP45-UD3P. With one stick installed, it boots fine. With 2 (2x2GB) it just gets stuck in a reboot loop. A little google research and I found I am not the only one dealing with this.
I am returning my OCZ Platinum memory and trying something else. Fortunately, I got Newegg to waive the restocking fee.
|
|
10-31-2008, 03:59 PM
|
||||
|
||||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
I believe it actually. Many DDr3 users have issues as well, and I used to have TONS of compatibility issues with P35 and OCZ. I am trying to get them to ship me some samples but have yet to find out anything
Ya, Newegg ROCKS!!! Always call in about issues and they will for sure help get things done and waived/cross shipped. Get ya some Mushkins and be stable!
__________________
|
|
11-03-2008, 05:27 AM
|
|||
|
|||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
hi any chance you could offer me some settings
running a e8400 wolfdale withOCZ 2GB Kit (2x1GB) DDR2 800MHz/PC2-6400 CL 4-4-4-15 PLATINUM on a GA-EP45-DS3L iP45 and 4850 grahpics just noticed while going to post my f7 details een though my memory is 4-4-4-15 auto is setting it at 5-5-5-15 will swapping it to the 4-4-4-15 help also upped voltage to 2.1 and mch to Last edited by payne_uk; 11-03-2008 at 05:36 AM.
|
|
11-03-2008, 03:47 PM
|
||||
|
||||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
8400 at stock speed with ram at 800 CAS4
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto or Fast CPU Clock Ratio ..........................: 9 Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................: 3Ghz Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 333Mhz PCI Express Frequency (Mhz) .........:Set to 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: <<< PCI Express Clock Drive.................: <<< CPU Clock Skew (ps)....................: <<< MCH Clock Skew (ps)...................: <<< DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [333] System Memory Multiplier ..............: 2.40 Memory Frequency (Mhz) ..............: 800 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................4 tRCD .........................................4 tRP'...........................................4 tRAS..........................................15 Advanced Timing Control tRRD...........................................3-5 tWTR..........................................3-6 (May need 12 for first time you set this) tWR............................................4-6 (May need 14 for first time you set this) tRFC...........................................38-42 tRTP...........................................3-6 Command Rate (CMD) ....................:2 Driving Strength Profiles Driving Strength ............................800 Channel A Static tRead Value.........................:7-10 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:7-10 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control Voltage Type.………... Manual CPU CPU Vcore….……….........................: Auto CPU Termination…..... 1.200V*.......: <<< Leave CPU PLL…………………....1.500V*.......: <<< Please set to stock manually CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly MCH/ICH MCH Core…………….....1.100V...........: << Auto MCH Reference….…….0.800V...........; <<< Leave MCH/DRAM Ref.…......0.900V...........: <<< Leave ICH I/O……………….....1.550V............: <<< Leave ICH Core…………...……1.100V............: <<< Leave DRAM DRAM Voltage ……....1.800V............: 2.0-2.1 DRAM Termination .…0.900V............: <<< Leave Channel A Reference 0.900V............: <<< Leave Channel B Reference 0.900V............: <<< Leave Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC Integrated Peripherals Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
__________________
|
|
11-03-2008, 04:28 PM
|
|||
|
|||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
hmm sill not to stable when i get the chance will post my f7 figures but do you think changing out the ocz memory would help ? as was considering getting some 2 x 2mb crucial anyway ?
|
|
11-03-2008, 05:17 PM
|
||||
|
||||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
It could help, but I bet it is all in your settings. Please do post that back with the exact settings you applied so I can see if maybe you missed something or still have something wrong
__________________
|
|
11-06-2008, 06:09 PM
|
||||
|
||||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
You lost me there. To give me what you are using, you write it down then put them in the template and post for me to see
__________________
|
|
12-06-2008, 04:59 PM
|
|||
|
|||
|
Re: Problems with GA-EP43-DS3L and 2x2GB memory
can anyone help me.this is what i see in BIOS
currently using kingston 2x2GB KVR800D2N5/2G same problem as anyone.. MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................: 9x Fine CPU Clock Ratio.....................: 0 CPU Frequency ...........................: 3.00Ghz (333x9) Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Disabled] CPU Host Frequency (Mhz) ............: 333Mhz PCI Express Frequency (Mhz) .........: Auto Advanced Clock Control [Press Enter] CPU Clock Drive...........................: 800mV PCI Express Clock Drive.................: 800mV CPU Clock Skew (ps)....................: <<< Leave MCH Clock Skew (ps)...................: <<< Leave DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: Auto Memory Frequency (Mhz) ..............: 800 DRAM Timing Selectable ................: [Auto] Standard Timing Control CAS Latency Time........................: Auto, reported 5 tRCD .........................................: Auto, reported 5 tRP'............................................: Auto, reported 5 tRAS..........................................: Auto, reported 18 Advanced Timing Control [Press Enter] tRRD...........................................: Auto, reported 3 tWTR..........................................: Auto, reported 3 tWR............................................: Auto, reported 6 tRFC...........................................: Auto, reported 52 tRTP...........................................: Auto, reported 3 Command Rate (CMD) ....................:0 Channel A Static tRead Value.........................:7 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:7 tRD Phase0 Adjustment...................:<<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control Voltage Type. ... Manual CPU CPU Vcore . .........................: 1.1875v CPU Termination ..... 1.200V*.......: <<< Leave CPU PLL ....1.500V*.......: <<< Leave CPU Referen. ....0.755V*.......: <<< Leave CPU Reference2 ,,0.800V*.......:<<< Leave MCH/ICH MCH Core .....1.100V...........: << MCH Reference . .0.800V...........; <<< Leave MCH/DRAM Ref. ......0.900V...........: <<< Leave ICH I/O .....1.550V............: <<< Leave ICH Core ... 1.100V............: <<< Leave DRAM DRAM Voltage ....1.800V............: DRAM Termination . 0.900V............: <<< Leave Channel A Reference 0.900V............: <<< Leave Channel B Reference 0.900V............: <<< Leave Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Disabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled]
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
