Problems with GA-EP43-DS3L and 2x2GB memory

[Kaptajn]

Hey TweakTown. I also have a problem with this mother board and perhaps my DDR3 ram?

When I boot I just get BSOD and then I ahve to press the reboot button from there to boot correctly. Not sure what's wrong but you guys sounds like you know your stuff so I would be grateful if you help me.

I have written down my bios settings.

Originally Posted by My bios!

Robust Graphics booster [auto]
CPU clock ratio [auto]
Fine CPU clock ratio [auto]
CPU frequency 2.83 GHz (333x8,5)

*** Clock ship control ***
>>> Standard clock control
CPU Host Clock control [Disabled]
x CPU Host frequency (MHz) 266
PCI Express frequency [auto]
C.I.A.2 [Disabled]
>>> Advanced clock control
Advanced clock control [Press enter] (maybe I should have pressed enter .....)

*** DRAM Performance control ***
Performance enhance [Turbo]
(G)MCH frequency latch [auto]
System memory multiplier(SPP)[auto]
Memory frequency (MHz) 800 800
DRAM timing selectable (SPD) [auto]
>>> standard timing control
didn't write down the names but the values where 5,5,5,18 and all on auto.
>>> advanced timing control
advanced timing control [Press enter]
*** Mother Board Voltage Control ***
Voltage types Normal Current
>>> CPU
CPU Vcore 1.30000 V [auto]
CPU termination 1.200 V [auto]
CPU PLL 1.550 V [auto]
CPU reference 0.805 V [auto]
>>> MCH/ICH
MCH core 1.100 V [auto]
ICH I/O 1.550 V [auto]
>>> DRAM
DRAM voltage 1.800 V [auto]

Is this enough information? If you need more just tell me, I would be very grateful for any help!

Kristian

[Chike]

Originally Posted by Kaptajn

Is this enough information? If you need more just tell me, I would be very grateful for any help!

Sure thing, but make your own thread. It is confusing and hard to keep track about 2 different issues in the same thread.

In addition to your seetings post a screen capture of MemSet main+SPD windows along with EasyTune advanced voltage.
Filling your signature with your system spec, with a link to your memory specs if possible, may also help.