Newer HP1000 models and Runcore

[dbacher]

On the HP 1030NR, potentially other HP1000 series netbooks, only half of the SSD bay is available, and so a Runcore drive will not physically fit. Before picking up a Runcore drive for a HP1000 series, pop off the keyboard by removing the two screws under the battery, and look at the bay. If there's not room for a full 1.8" drive, then you're not going to be able to fit the Runcore in.

The included cables are at least twice as thick as they should be. In addtion to the complaints others have raised about this, the socket on the runcore physically cracked after cable insertion. The cable HP uses has no issue, goes in and out with no pressure just like it should -- on both the stock drive and the Runcore.

[verphilbio]

the USB port can remove under the ssd, after remove, may have room for 1.8 ZIF
the original cable works on the 1.8ZIF

[Tony Almeida]

I have 2 picture,may be referenced!

[Tony Almeida]

2

[Chris.Liu]

nice move, tony~