|
|
|||||||
| Runcore Runcore is a leading Manufacturer of Prosumer, Industrial, and Military grade SSD (Solid State Drives). Come on in and talk about our SSD products - we will be on to support with any questions! |
 |
|
|
LinkBack | Thread Tools |
Rating: 
|
Display Modes |
07-04-2009, 02:10 AM
|
|||
|
|||
Upgrading Asus EEEPC 900 to 32g SSD
My problem is while the ASUS Bios can "see" the 32g SSD it will not boot off of it. The BIOS shows the 32G SSD as a drive to select in the boot priorty it does not show it available in the Master/Slave section of the BIOS. When installed the 16G SSD does show up as Master. I also used the ASUS Recovery CD to load the RunCore 32g SSD and the ASUS won't boot from the RunCore either. What could be the possible problems and how can I correct the problem(s). Last edited by CherokeeSix; 07-04-2009 at 05:04 AM.     
|
|
07-04-2009, 01:16 PM
|
|||
|
|||
|
Re: Upgrading Asus EEEPC 900 to 32g SSD
It is a Dinosaur Days quention! you must upgrade the latest BIOS version....
|
|
07-04-2009, 08:05 PM
|
|||
|
|||
|
Re: Upgrading Asus EEEPC 900 to 32g SSD
hi, chero, this Runcore ssd is a sata drive, and sata signal has no definition for master/slave, only a sata master.
maybe it is good for you to update bios to the latest version 1006, and you can see it as a sata master.
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
