GIGABYTE Latest Beta BIOS

[johnathonm]

Hi,

Well, I have an evil OCZ SSD and in the modded bios (the one I made) it is using the 10.6.0.1091 ROM. There is a huge pdf of all the changes and fixes but it heavily targets the SSD area. The Realtek rom is for the onboard network card. I don't think I've actually seen a changelog for the option rom. The audio chip is static, as far as I am aware. There are sometimes updates to other pieces of firmware in the bios like the Management Engine in some cases.

In any event, I'll mod the F5d when I get home from the University and test it on myself before posting.

-J

[johnathonm]

Hi everyone,

I modded the P67-UD4-B3 F5D Bios:

Includes the Intel 10.6.0.1091 RST Option Rom
Realtek 2.41 firmware

I have tested this on my own board without issue. However, as always, please be aware of the risks associated with flashing your bios. Do so at your own discretion and risk.

Multiupload.com - upload your files to multiple file hosting sites!

[stasio]

I'd appreciate changelogs for beta BIOS updates as well (z68 ud7 in my case). Shouldn't be that hard for the developers to write down a quick list of intended changes/fixes.

My dear friend (and others),
received yesterday 6.30 PM(Taiwan time) arround 20 new internal test Beta BIOS's for P67 and Z68 boards and as many times stated in earlier posts,some came with changelog...some not.
So,supose to be:

-Fix MultiStep Loadline
-Fix Ram/CPU Multi bug
-Pleriminary support for (P67A) TouchBIOS (still some bug in Voltage section)
-18/19.Jul 11

Note:
Please note that this beta BIOS is still under testing and not approved by GBT standard test procedure

[crazyquay]

Hi,

Well, I have an evil OCZ SSD and in the modded bios (the one I made) it is using the 10.6.0.1091 ROM. There is a huge pdf of all the changes and fixes but it heavily targets the SSD area. The Realtek rom is for the onboard network card. I don't think I've actually seen a changelog for the option rom. The audio chip is static, as far as I am aware. There are sometimes updates to other pieces of firmware in the bios like the Management Engine in some cases.

In any event, I'll mod the F5d when I get home from the University and test it on myself before posting.

-J

You and me both... thanks for the mod. I've just flashed your F5D so keeping fingers crossed.

[Lsdmeasap]

Good, well bad, but bad in a good way, thats confused you.

Odd one eh?, surprised they didnt spot this in beta testing, unless they were waiting for me to test it :)

So shouldnt be long till a fix i would imagine, for the ud9 and any other boards that would be affected.

Hope they add a release log, so we know what the updates do.

Here ya go Pablo! Let me know if you have any issues, thanks!

GA-X58A-UD9 Beta BIOS - F6c
Fix: Marvell Ports SSD Detection Issue (From F6b)

x58aud9.f6c

[Pablo]

UD9 F6c bios, now working fine.

Whatever was done has sorted the problem, so should be fine for other ud9 users also now.

Oh and thanks for reporting issue and getting resolved , appreciated.

Not sure what F6c adds though over F5 bios ?

[smotazor]

I installed the F8f BIOS on my GA-Z68X-UD4-B3 and the RAM multiplier problem I reported earlier is resolved. Setting the ram at a specific speed in the BIOS gives the correct value in windows, and this is reflected in benchmarks as well.

Thank you.

[Falkentyne]

What exactly does "Fix LLC multistep" in the P67 UD5/Ud7/Z68's mean exactly? x.x Stop the random overshooting/undershooting around LLC6 and up?

[stasio]

New BIOS for P67 and Z68 updated (also on GB web page).

-Support GIGABYTE TouchBIOS
-Support Intel 22nm CPU

[kamikaze24]

New BIOS for P67 and Z68 updated (also on GB web page).

-Support GIGABYTE TouchBIOS
-Support Intel 22nm CPU

Thanks .

Nothing else ??

We must update the dedicated software ???