Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

[stasio]

Updated with:

ATI Catalyst 9.2 driver

Catalyst™ 9.2 brings performance benefits in several cases where framerates are
CPU-limited. Some measured examples are:
• Crysis DX10 gains up to 20%
• Crysis Warhead DX10 gains up to 20%
• World in Conflict gains up to 5%

Performance Improvements
Catalyst™ 9.2 brings performance benefits in several cases where framerates are
CPU-limited. Some measured examples are:
• Crysis DX10 gains up to 20%
• Crysis Warhead DX10 gains up to 20%
• World in Conflict gains up to 5%
Resolved Issues for the Windows Vista Operating
System
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows Vista. These include:
• Catalyst Control Center now enables Anisotropic Filtering for DirectX 10
applications.
AMD Chipset Product Support
AMD Chipset Product Support
ATI Radeon™ HD 3300 Series ATI Radeon™ Xpress 3200 CrossFire
ATI Radeon™ HD 3200 Series AMD 690 Series Chipset
ATI Radeon™ 3100 Series AMD 580X Series Chipset
ATI Radeon™ 3000 Series ATI Radeon™ Xpress 1150 Series
ATI Radeon™ 2100 Series ATI Radeon™ Xpress 1100 Series
ATI Radeon™ X1250 Series ATI Radeon™ Xpress 200 Series
ATI Radeon™ X1200 Series ATI Radeon™ Xpress 1250 Series
Note: When installing the Catalyst™ Vista driver for Windows Vista,
the user must be logged on as Administrator or have Administrator
rights in order to successfully complete the installation of the Catalyst™
Vista driver.
ATI Catalyst™ Release Note 5
• Resolved Catalyst Control Center displaying the following warning message
“The Catalyst Control Center is not supported by the driver version.”
• Catalyst Control Center, Display Manager correctly shows connected monitor
maximum refresh rates
• Catalysts Control Center, component video pixel format settings are retained
on system restart
• Minor screen corruption no longer occurs at the top left of some Samsung
panels when connected to ATI Radeon HD 3200 Graphics
• In Call of Duty 4, some intermittent game corruption no longer occurs when
soften smoke edges is enabled
• Resinstalling the display driver using the INF method on a multi-display (ATI
Radeon HD 3870 X2, Radeon HD 3870) system does not cause the operating
system to fail
• Resolved minor flickering in the playback of a Blu-ray title that may be
noticed when moving to the extended desktop
• Catalyst Control Center, Crossfire Overdrive, changing the GPU Clock and
Memory Clock from the default settings no longer causes a failure in the Test
Custom Clocks test
• With Anti-Alias enabled Doom3 no longer intermittently fails to start on some
Crossfire systems
• Enemy Territory: Quake Wars corruption observed in the globe in the main
menu no longer occurs
• The display driver

MemSet v.4.0-updated

updated with tREF calculating in clock. (in spd table)
work only on 965/P35/P45 chipset

OCCT 3.0.1 RC1

Changelog :
* Built-in monitoring updated
* CPU Usage cannot be below 0 anymore
* The OCCT directory is now properly deleted upon uninstall

CrystalDiskInfo 2.1.2

fix bug

[stasio]

Updated with:

SetFSB 2.1.97.0



Added ICS9LPRS365BGLF(FS U9200 with the hardware remodeling).
Supported Acer TravelMate 2428AWXMi(CV125PAG).

[stasio]

Update with:

Everest Ultimate Edition 5.00.1667

* Hardware Monitoring / improved current CPU clock measurement
* detection of ATI Catalyst 9.2 driver
* fixed: motherboard specific sensor info for Gigabyte P31-ES3G
* fixed: south bridge information for Intel ICH10, Ibex Peak PCH
* fixed: lockup on MSI MegaBook S270, MegaBook S430 (while ISA sensors detection and SMBus scanning)

Core Temp 0.99.5 (Build 11) (32/64-bit)

- Fix: Incorrect clock speeds reported on some systems.
- Fix: At startup Core Temp shows 0 (?) or 21 (?) on AMD K8 series.
- Fix: Turion MK series recognition was wrong.
- Add: Completely new code for processor speed detection.
- Change: Temp turns Orange when temperature is over TControl, and Red when CPU is thottling/critical.

This version is still "warm" from the compiler. The drivers it comes with are NOT digitally signed (as they are not finalized yet), so Windows Vista and 7 64bit users will have to reboot and Disable driver digital signature enforcement by pressing F8 at startup.

[Dweirdo]

awesome hands down!

[stasio]

Thanks Dweirdo,
updated with:

OCCT 3.0.1

Changelog (Since 3.0.0) :

GPU:MEMTEST
    * Now compatible with GeForce cards with more than 512MB under Vista (A Cuda bugs was encountered, but i found a workaround)
    * Now 4 times faster (thanks to a switch to Cuda 2.1 which came with bugfixes in the SDK - new prerequisites though)
    * The test cannot be run on GeForce 7 or lower anymore

MONITORING
    * OCCT now saves monitoring sensor based on sensor names when available, not on position in a list. Thus, when a sensor disappear, OCCT configuration is preserved
    * Engine has been updated - new CPU support,...
    * the maximpum CPU temp can now be set at a temp higher than 99°C (before, it could be done, but it was reset upon reloading OCCT at 80°C)

TRANSLATION
    * Arabic and Romanian support have been added
    * Italian have been updated

OCCT REQUIREMENTS
    * Up-to-date DirectX9 (Under Vista, DirectX 10 and 9 are updated separatly) for GPU:3D and Power Supply
    * Nvidia Drivers 181.22 or later for GPU:MEMTEST (Now based on CUDA 2.1,as several critical bugs have been fixed in this release).

ATI Tray Tools 1.6.9.1382 Beta

· Fixed localization bugs for CrossFire dialog window
· Updated ini files handling procedures to be more compatible with Windows Vista
· Improved compatiblity with IE7 under Vista with UAC enabled.
· Added new localizations

CrystalDiskInfo 2.1.3

* Improve "Event Log" support (2000/XP Home)
* Improve "Graph" feature
* Improve "User Interface Design"
* Improve "Health Status" detection
* Add "Rotation Rate" support
* Fix bugs

[stasio]

Updated with:

LinX 0.5.7

Changes:
- slight UI redesign: some options moved to the Settings window
- added a better About window

RealTemp 3.06

-fix missing cores
-extra button for Nvidia owners to make it easier to see the Minimum and Maximum GPU temperatures.
-Core i5 support has been added as well as support for some of the early Core i7 based Xeon (ES) processors

OCCT 3.0.1a.b01

Changelog :
* GPU:MEMTEST will now refuse to execute on cards incompatible with Cuda 2.0/2.1. I recently discovered that this list includes 8800GTS/GTX/ULTRA (i.e. G80-based cards). You need G84 based cards, or later. For me, this is seriously hindering GPU:MEMTEST usefulness.

HWiNFO32 2.37 Build 203

# Fixed reporting of temperatures for ADT7473 sensor on nVidia GPUs.
# Added preserving of sensor settings.
# Added preliminary Jasper Forest support.
# Fixed Poulsbo memory timings.
# Enhanced memory timings for some chipsets.
# Added preliminary Nuvoton W83795G/ADG HW monitor support.
# Updated reporting of PCI Express slots in system.
# Several other minor updates and bugfixes.

SIW 2009.02.24

* Improved "Storage Devices" module.
* Improved support for AMD Phenom II processor.
* New Intel Core i7 models.
* Support for NVIDIA 740i chipset.
* Removed "Sandbox" warning.
* Minor improvements and bug fixes.

[stasio]

Updated with:

Core Temp 0.99.5 (Build 14) (32/64-bit)

- Add: Completely new code for processor speed detection.
- Add: Running several instances of Core Temp is now possible (enable in Settings).

CrystalDiskInfo 2.2 Alpha 1

Realtek High Definition Audio Driver R2.17

JMB36X_WinDrv_R1.17.47WHQL(eSATA)


- Fix the issue that IDE HDD is wrongly set as UDMA mode 2. (a bug of R1.17.44.02)
- Fix the issue that hard disks are removed for unknown reasons sometimes.
- Fix the issue that DTM 1.3 "Reinstall With IO" failed on Windows 7.
- Fix the issue that disk error counter is not written to disk successfully.
- Fix the issue that creating RAID from existing disk results in BSOD.
- Fix the issue that hotplug failed sometimes.
- Fix the issue that when SATA ODD is connected IDE disk will disappear after resuming from S3.
- Add the option to support AAM.

[stasio]

Updated with:

RivaTuner 2.24

Changelog

[stasio]

Updated with:

CPU-Z 1.50.2

Realtek RTL8111/8168 Lan Driver- 5.714.0219 (XP 32/64)
Realtek RTL8111/8168 Lan Driver-6.216.0219 (Vista 32/64)

Geekbench 2.1.2

[criteriadan]

Update with:

CPU-Z 1.50.2

Realtek RTL8111/8168 Lan Driver- 5.714.0219 (XP 32/64)
Realtek RTL8111/8168 Lan Driver-6.216.0219 (Vista 32/64)

Some amazing work being done here thanks.