GA-H67MA-UD2H-B3 v1.1 (Bios F4) reporting strange values

[Geor9e]

New build, all running nicely afaik....

CPUID HWMonitor is displaying some weird data, as per pic.

Although I'm using a cheapo PSU, I'd presume that if these values were really true, the system would not actually boot?

I'm using one 4 pin P4 +12v connection, btw.

Can anyone advise on these values, as I'm not a massive tweaker, but I'm a bit worried about this.



setup:

Windows Home Premium SP1 64bits running on...

Gigabyte GA-H67MA-UD2H-B3 v1.1 (Bios F4)
Intel Core i5-2500 & stock cooler
2 x Nanya Technology Elixir DDR3 PC-10600 1333Mhz 4GB
GFX#1 - Intel IGP
GFX#2 - Asus Geforce EN210 1GB PCI-E 16x
4 x Samsung EX2220X LCD
Intel X25-M 80GB
550W PSU

[wazza300]

What values are you worried about in that pic? Voltages look ok to me,any voltages you want to check,check them in the bios or in easytune/advanced/voltage 1 ,they will be the most accurate

[Geor9e]

What values are you worried about in that pic?

Voltage 2 2.94 Volts [0xF5] (+3.3V)
Voltage 3 2.80 Volts [0x8B] (+5V)
Voltage 4 2.93 Volts [0x3D] (+12V)
Voltage 5 -4.90 Volts [0x66] (-12V)
Voltage 6 -6.14 Volts [0x80] (-5V)
Voltage 7 2.84 Volts [0x8D] (+5V VCCH)

Basically all of them!

Yes! I'll check with the Gigabyte app... Thanks.

[Geor9e]

Gigabyte util states +12v is on spec.

Worry mode :off: !

[wazza300]

I think its hw monitor,best to try a few programs and compare,try aida,I would only start worrying if it doesn't start up at all or crashes/reboots,then I would think about a better psu

[Lsdmeasap]

It's probably just that app has not been updated for your board yet, you can send in a report at their forum and hopefully he will add in compatibility on the next update.