GIGABYTE Modified Bios

[stasio]

It's 10.5.1.1070

Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools

[NoJuan999]

^ Delete it, I just opened it and it was just a Mis-labeled version of 10.5 that was posted on Station Drivers Forum and has been since deleted.
Sorry, I should have checked it Before Posting.

[stasio]

Nope bro,we are all human.

[Acebmxer]

ok has been removed

[cristi18r]

Can you mod the Intel AHCI Rom version 120e0027_03232010 to work with GA-X58A-UD3R (rev. 1.0)?. I don't use use RAID and I would like the update the AHCI Rom. I'll mod the bios myself, I just need a working AHCI Rom. Thanks

[Acebmxer]

Can you mod the Intel AHCI Rom version 120e0027_03232010 to work with GA-X58A-UD3R (rev. 1.0)?. I don't use use RAID and I would like the update the AHCI Rom. I'll mod the bios myself, I just need a working AHCI Rom. Thanks

That newer ahci rom is for P67/Z68. I believe LSD said it has to be edited or extracted a different way to be used in other chip sets. Maybe LSD or another Modder can comment.

Edit -

can someone add Intel AHCI ROM >> 1.20_E.0027 03/23/2010 to this bios.

Model: GA-ep45-ds3p
Bios Type: AWARD
Bios Revision: f9d
Bios link: http://www.station-drivers.com/telec...ivers.com).zip


I tried to mod but AHCI is above the Minit no success.
help??

That AHCI ROM only works for "Some" P67, until someone hex edits it for other chipsets.

So, the minit file is not the issue, just letting you know so you don't think that's the reason.

[cristi18r]

Thanks Acebmxer.

Lsdmeasap, do you know how to edit the new ahci for my board?

That AHCI ROM only works for "Some" P67, until someone hex edits it for other chipsets.

So, the minit file is not the issue, just letting you know so you don't think that's the reason.

[Lsdmeasap]

ATTN ALL!! ~ DO NOT insert Intel 11.5 ROM into X79 BIOS!!!

I just spent 2 hours in shorting recovery mode, finally saved my board though!! This modification causes a non-boot instance, the board just sits there and runs, no beep errors and nothing on screen.

Recovery via 6+7 short this time!! Took me many tries too because the board kept freezing at the 3D BIOS load screen, then rebooting back to the failed BIOS. So anyway, after several scary attempts (Just shorted a board trace out a few weeks ago via 4+8 accidentally Vcc+Ground=Magic Smoke) I finally got it! I tried 4+7 and 6+7, both took me to the same place immediately as expected, but due being unable to enter the BIOS or load Qflash on account of the 3D screen freeze I wasn't able to recovery manually myself as intended, but luckily I finally got it into recovery mode and it eventually recovered itself.

So anyway, everyone please DO NOT attempt to insert legacy 11.5 or older ROMs into X79 BIOS, or Z77 as well most likely! I assumed since there was legacy boot ROM options this would be possible, it IS NOT, at least not in the way that we normally do it!

[Acebmxer]

I thought I read somewhere I dont know the exactly link but I think it was over at XS someone said they were able to use the 11.5 IRST over the Enterprise 3.x. Now that I type this out I think they maybe referring to the drivers not the raid rom.

Sorry to hear about almost bricking your board. Good thing you were able to save it.

[Lsdmeasap]

I thought I read somewhere I dont know the exactly link but I think it was over at XS someone said they were able to use the 11.5 IRST over the Enterprise 3.x. Now that I type this out I think they maybe referring to the drivers not the raid rom.

Sorry to hear about almost bricking your board. Good thing you were able to save it.

Thanks for caring! Haha - as long as I don't short ground to power I'm normally OK to recover, this one had me getting mad though cause of the freeze at 3D screen!

Ya, it's just the drivers, and you need to use a certain package of them (linked below), or modified version that you need to force install and you don't get the GUI that way

These will install normally, and let you have the GUI too, non-modified
Intel RST 11.5.0.1109 Alpha.zip