GIGABYTE Modified Bios

[boe323]

did you notice that with all the bios from f8 and up will cause the windows logo to freeze for about half a second?, this updated rom you modded into the bios solves it for me.I was also wondering if you could check your xmp profile timings and see if the bios actually sets them correct or makes them looser? i have a feeling that on my board there is a dodgy slot stopping it from setting the correct timings unless you can say its happening to you?.(Last question i promise)

[boe323]

Had to go back to g1 assassin 2 f11b, i either get my mouse working in the f10 bios and have no usb keyboard or use f11b and have the usb keyboard with no mouse and a dodgy ps2 port, well, i want my usb keyboard.But still a thankyou for the updated intel enterprise rom.

[christer12]

I had some problems with the mouse too, we just have to wait to Gigabyte fix this. It's a pretty slow start-up of windows with me too and I have a SSD hard drive. The speed of the SSD harddrive is considerably reduced in the X79 motherboard and it freeze.. =/

[autocrosser]

Sorry I have not got back with you before now---with the the modded X58A-OC bios I have very easily done 4GHZ with my i7-940 (with HT on) & max temps are in the hi 60's/low 70's. Feel that I can run 4.1/4.2 without problems---wish that I'd spring for the OC board a year ago when I had bought the UD5......

[boe323]

Chris, if you think the ssds load slow,well,I'm using a single hdd at the moment,the speed was already pretty slow,now its worse on the g1 assassin 2, have you seen how many system drivers this board uses, theres hardly any hardware on the board lol, its crazy.I think nearly all of them are the cpu.I don't get how other manufacturers of x79 boards managed to release them with all the basic monitoring and there fully working bios and yet gigabyte release there x79 unfinished,lacking in performance ,they could of at least give us our basic monitoring ie,cmos batt,3.3v a few others. Have you tried rste GUI 3.1.0.1085, i find it a little more responsive for me, but im using hdd, give it a try, although i think your probably using it as you already updated the option rom in the bios.Im also apolagise to the thread owner for going a lttle of topic. Just thought id let you know that you can use hddscan to mintor your drives with irst enterprise scsi controllers.

[JohnFante]

It it is possible I would appreciate a updated bios for GA-EX58-UD4P.

I am using the latest beta bios - 14q - from this forum. ex58ud4p.rar

By updated I mean all the latest firmware for IRST, Realteck and Jmicron and what else there is.

And also a short how to.

Huge thank you in advance! :-)

[Acebmxer]

Fist Post Updated with...

EX58-UD4 Bios F14q MOD Complete
Updated with...
IRST 11.1.0.1413
Realteck 2.47
Jmicron 1.07.28
EX58-UD4_F14q_MOD_Complete_5_6_12

[viofla]

GA-X58A-UD9 F6 MOD

Updated with...

IRST 11.1.0.1413
Realteck 2.46
Jmicron 1.07.28

mb_bios_ga-x58a-ud9_Mod_3_1_12_f6.rar


Hello, could be a full biosmod the latest marvell THANKS
UD9 X58 F6
Sorry for my English

THANKS
THANKS
THANKS

[Acebmxer]

First post updated with...

GA-X58A-UD9 F6 MOD Complete
Updated with...
IRST 11.1.0.1413
Realteck 2.47
Marvell Bios Version 1.0.0.1033 / Firmware 2.2.0.1125
After flash is complete, shut down fully and switch off PSU, wait one minute and clear CMOS. Then turn on, boot to BIOS and load optimized and save/apply/reboot back to the BIOS. Once in the BIOS again set AHCI settings and Marvell Firmware mode to "Force", then save/apply/reboot and let it load through to windows, before that happens Marvell Firmware will update and board will reboot.*
mb_bios_ga-x58a-ud9_Mod_5_6_12_f6_complete

[viofla]

thank you very much