GIGABYTE Modified Bios

[talmen]

Im sorry that board is very old, I am not sure which version of cbrom would work let alone which Intel raid rom would work. I know for sure the latest raid rom will not work. Maybe some one else would like to try and do a mod for him.

RAID Option ROM version:7.5.0.1017 - http://www.gigabyte.us/products/prod...px?pid=2665#sp

[NуроFеn]

GA-X58A-UD5 Rev 2.0 Bios Ff3 Complete Mod
Update with...
IRST 11.1.0.1347
Realtek 2.47
Jmicron 1.07.28
Marvell Bios Version 1.0.0.1033 / Firmware 2.2.0.1125

When will be a new update? Will you fix some bugs? or do you think that there aren't any bugs?

Bios will be updated under the windows 8

Thank you :)

[Acebmxer]

First Post updated with...

GA-X58A-UD5 Rev 2.0 Bios Ff3 Complete Mod
Update with...
IRST 11.5.0.1414
Realtek 2.48
Jmicron 1.07.28
Marvell Bios Version 1.0.0.1033 / Firmware 2.2.0.1125
After flash is complete, shut down fully and switch off PSU, wait one minute and clear CMOS. Then turn on, boot to BIOS and load optimized and save/apply/reboot back to the BIOS. Once in the BIOS again set AHCI settings and Marvell Firmware mode to "Force", then save/apply/reboot and let it load through to windows, before that happens Marvell Firmware will update and board will reboot.*
X58AUD5MOD_7_20_12_Complete.ff3

[2886zhu]

GA-X58A-UD5 Rev 1.0 Bios F8b Complete Mod
Update with...
IRST 11.5.0.1347
Realtek 2.47
Jmicron 1.07.28
Marvell Bios Version 1.0.0.1033 / Firmware 2.2.0.1125

can you update this board bios too,thank you very very much!

[Acebmxer]

First Post Updated With...

GA-X58A-UD5 Rev 1.0 Bios F8b Complete Mod
Update with...
IRST 11.5.0.1414
Realtek 2.48
Jmicron 1.07.28
Marvell Bios Version 1.0.0.1033 / Firmware 2.2.0.1125
After flash is complete, shut down fully and switch off PSU, wait one minute and clear CMOS. Then turn on, boot to BIOS and load optimized and save/apply/reboot back to the BIOS. Once in the BIOS again set AHCI settings and Marvell Firmware mode to "Force", then save/apply/reboot and let it load through to windows, before that happens Marvell Firmware will update and board will reboot.*
X58AUD5MOD_7_20_12.f8b

[Acebmxer]

First Post Updated With...

Z77X-UP5 TH Bios F4 MOD
Update with...
1. Intel® RAID ROM 11.5.0.1414
2. Intel® VGA ROM 2137
3. Marvell SATA3 ROM 1.0.1.0025
4. Intel® LAN ROM 1.3.95 PXE 2.1 Build 091
z77xup5thMOD_7_21_12.f4

Z77X-UD5H Bios F10a MOD
Update with...
1. Intel® RAID ROM 11.5.0.1414
2. Intel® VGA ROM 2137
3. Marvell SATA3 ROM 1.0.1.0025
4. Atheros LAN ROM 2.0.6.6 and 2.1.1.1 PXE 2.0 Build 083
5. Intel® LAN ROM 1.3.95 PXE 2.1 Build 091
z77xud5hMOD_7_21_12.10a

Z77X-UD3H Bios F12h MOD
Updated with...
1. Intel® RAID ROM 11.5.0.1414
2. Intel® VGA ROM 2137
3. Marvell SATA3 ROM 1.0.1.0025
4. Atheros LAN ROM 2.0.6.6
z77xud3hMOD_7_21_12.12h



Second Post Updated With...


Atheros 2.0.6.6 ROM
Atheros_PXE_2.1.1.1

Intel_VGA_ROM_2137

Marvell_SATA3_ROM_1.0.1.0025

[izzner]

I have downloaded and successfully flashed the Modified bios(*MOD.FF3) from the first page of this thread for My Gigabyte X58A UD5 Rev 2.0
but am facing a BIG problem.
I cannot add a SLIC 2.1 table to that file using AWARDTool 1.52(tried all methods FACS, SSV3, ACIPTBL at end etc)

It is therefore requested to kindly update the below file(FF3) which already has a Slic table with latest ROM modules

X58AUD5_SLIC.FF3

[Acebmxer]

I have downloaded and successfully flashed the Modified bios(*MOD.FF3) from the first page of this thread for My Gigabyte X58A UD5 Rev 2.0
but am facing a BIG problem.
I cannot add a SLIC 2.1 table to that file using AWARDTool 1.52(tried all methods FACS, SSV3, ACIPTBL at end etc)

It is therefore requested to kindly update the below file(FF3) which already has a Slic table with latest ROM modules

X58AUD5_SLIC.FF3

Hi I have been attempting to do the mod for you but something with the way you modded the bios I can not update the Jmicron rom along with Marvell Firmware. So the only oroms I can update are the Intel raid and the Realtek lan. If these 2 are ok for you and can post the mod but if you wanted all oroms updated I can not.

Someone else had me mod a bios that was already modded with slic but I had no issues.

[NуроFеn]

Acebmxer, X58AUD5MOD_7_20_12_Complete.ff3 no problems with it?

[Acebmxer]

Acebmxer, X58AUD5MOD_7_20_12_Complete.ff3 no problems with it?

Yes that one should work just fine. Let me know if you do have any problems but you should not. I only had problems with the mod izzner wanted.